Premium Information is available for this item - Upgrade for $1 a day
5935-01-012-7932
Electrical Receptacle Connector
5935010127932 010127932 SAE-AS81511/1 348-40E16-07P1-2 M81511/01EE04P1 M81511-01E16-07P1 MIL-C-81511/1
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
November 2023
6
Marketplace 5935-01-012-7932
Request a Quotation from participating marketplace vendors
Related Documents 5935-01-012-7932 5+ Documents (More...)
United States (US) 4. 5935-01-012-7932 Marketplace Restrictions Approved Sources Datasheet Management
M81511/01E16-07P1 CONNECTOR,RECEPTACLE,ELECTRICAL 5 EA NS Request Quotation M81511/01EE04P1 CONNECTOR
M81511/01EE04B1 MIL-C-81511/1 The main or principal part of a CONNECTOR, RECEPTACLE, ELECTRICAL which
M81511/01EB01P3 MIL-C-81511/1 An electrical fitting with electrical contacts constructed to be affixed
M81511/01EB01P3 MIL-C-81511/1 An electrical fitting with electrical contacts constructed to be affixed
M81511/01EE04B1 MIL-C-81511/1 The main or principal part of a CONNECTOR, RECEPTACLE, ELECTRICAL which
M81511/01EB01P3 MIL-C-81511/1 An electrical fitting with electrical contacts constructed to be affixed
M81511/01EE04B1 MIL-C-81511/1 The main or principal part of a CONNECTOR, RECEPTACLE, ELECTRICAL which
M81511/01EE04B1 MIL-C-81511/1 The main or principal part of a CONNECTOR, RECEPTACLE, ELECTRICAL which
7637589P8 348-20E10-12P2 An electrical fitting with electrical contacts M81511/01EE04B1 MIL-C-81511/1
Restrictions 5935-01-012-7932
5935-01-012-7932 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains gold.
Import and Export 5935-01-012-7932
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-01-012-7932
- US Army (A918)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- A196
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTKEJBHD
- Canada (ZC01)
- Effective Date:
- 1 Mar 2001
Approved Sources 5935-01-012-7932
- Part Number
- Manufacturer
- Status
- SAE-AS81511/1
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- M81511/01EE04P1
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- M81511-01E16-07P1
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- M81511/01EE04P1
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MIL-C-81511/1
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 348-40E16-07P1-2
- 02660 - Amphenol Corp Spectra-Strip/Itd (Replaced)
- Advisory Reference
- Advisory Reference
Datasheet 5935-01-012-7932
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Distance From Mounting Shoulder To Front Face [AFQK]
- 0.765 Inches Minimum And 0.775 Inches Maximum
- Center To Center Distance Between Mounting Facilities Parallel To Height [AEBW]
- 0.964 Inches Minimum And 0.974 Inches Maximum
- Connector Locking Method [AFRV]
- Bayonet Pin
- Contact Material [CQTZ]
- Copper Alloy Single Mating End Single Contact Grouping
- Contact Removability [AFQZ]
- Removable Single Mating End Single Contact Grouping
- Contact Position Arrangement Style [AFQX]
- 16-07 Single Mating End
- Contact Surface Treatment Document And Classification [CRBJ]
- Mil-G-45204,Type 1,Class 1 Mil Spec Single Treatment Response Single Mating End Single Contact Grouping
- Contact Surface Treatment [CQYH]
- Gold Single Mating End Single Contact Grouping
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Width [AEHA]
- 0.964 Inches Minimum And 0.974 Inches Maximum
- Environmental Protection [ADZC]
- Pressure Proof And Moisture Resistant And Vibration Resistant
- Body Style [AAQL]
- Straight Shape, External Coupling
- Mating End Quantity [AFQW]
- 1
- Included Contact Quantity [CXCG]
- 7 Single Mating End Single Contact Grouping
- Included Contact Type [CXCL]
- Round Pin Single Mating End Single Contact Grouping
- Insert Position In Deg [AFRP]
- 0.0
- Polarization Method [AFRN]
- Keyway Or Multiple Keyway
- Precious Material And Location [PMLC]
- Contact Surfaces Gold
- Precious Material [PRMT]
- Gold
- Precious Material And Weight [PMWT]
- 0.007 Gold Grains, Troy
- Shell Material [CSPT]
- Aluminum Alloy 6061
- Shell Material Document And Classification [CTHH]
- Qq-A-367,Comp 6061,T6 Fed Spec Single Material Response
- Shell Surface Treatment [CSWM]
- Cadmium
- Shell Type [AFRT]
- Solid
- Shell Surface Treatment Document And Classification [CTBC]
- Qq-P-416,Ty 2,Cl 3 Fed Spec Single Treatment Response
- Overall Height [ABKW]
- 1.242 Inches Minimum And 1.258 Inches Maximum
- Overall Length [ABHP]
- 1.275 Inches Minimum And 1.340 Inches Maximum
- Overall Width [ABMK]
- 1.242 Inches Minimum And 1.258 Inches Maximum
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.116 Inches Minimum And 0.126 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-81511-1 Government Specification
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Crimp Single Mating End Single Contact Grouping
- Test Data Document [TEST]
- 81349-Mil-C-81511 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5935-01-012-7932
DLA Procurement Analysis 5935-01-012-7932
- Last Stock Position:
- 8 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5935-01-012-7932
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5935-01-012-7932
Freight Information 5935-01-012-7932
5935-01-012-7932 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-01-012-7932 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-01-012-7932 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-01-012-7932 is not classified as a special type of cargo when transported by water. 5935-01-012-7932 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-01-012-7932
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5935-01-012-7932 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: