Premium Information is available for this item - Upgrade for $1 a day
5935-00-931-4102
Electrical Receptacle Connector
5935009314102 009314102 MIL-C-8384 MS24042-3 MS24042-2
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
May 2023
14
Marketplace 5935-00-931-4102
Request a Quotation from participating marketplace vendors
Related Documents 5935-00-931-4102 5+ Documents (More...)
Documents 5935-00-666-3659 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-59/fsc-5935/us 5935-00-931-4102
Electrical Receptacle Connector 009314102 Standard RNCC 4 RNVC 1 MEDALS DAC E MIL-C-8384 https/
CONNECTOR MIL-C-28748/5 CONNECTOR,RECEPTACLE,ELECTRICAL 216 EA NS Request Quotation MIL-C-8384 CONNECTOR
MIL-C-28748 An item specifically designed to be placed around MIL-C-8384 BACKSHELL,ELECTRICAL CONNECTOR
Electrical Receptacle Connector 009314102 5935-00-931-4102 5935009314102 009314102 is an electrical
Navy (DN)NZDiscontinued-Use 5935-00-931-4102Defense Logistics Agency (DS)IZDiscontinued-Use 5935-00-931-4102
Electrical Receptacle Connector 009314102 Vendor Details.. 5935/us 5935-00-557-2942 Electrical
Connector Backshell 5935005572942 MS24132-4S B130081 MRE14H1 MIL-C-8384 https//www.nsnlookup.com /fsg
Restrictions 5935-00-931-4102
5935-00-931-4102 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains gold.
Import and Export 5935-00-931-4102
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-00-931-4102
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- NIND
- Supplementary Collaborators:
- HDKE
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Jul 1997
Approved Sources 5935-00-931-4102
- Part Number
- Manufacturer
- Status
- MS24042-3
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- MIL-C-8384
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MS24042-2
- 96906 - Military Standards (Active)
- Transferred
- Transferred
Datasheet 5935-00-931-4102
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Bushing Accommodation Hole Shape [CXCJ]
- Round
- Connector Locking Method [AFRV]
- Latching Ring
- Contact Removability [AFQZ]
- Nonremovable Single Mating End Single Contact Grouping
- Contact Maximum Current Rating In Amps [AFRC]
- 7.5 Single Mating End Single Contact Grouping
- Contact Surface Treatment Document And Classification [CRBJ]
- Mil-G-45204 Ty 1,Grade C Mil Spec Single Treatment Response Single Mating End Single Contact Grouping
- Contact Surface Treatment [CQYH]
- Gold Single Mating End Single Contact Grouping
- Environmental Protection [ADZC]
- Humidity Resistant And Shock Resistant And Thermal Shock Resistant And Vibration Resistant
- Body Style [AAQL]
- Straight Shape, Latching
- Mating End Quantity [AFQW]
- 1
- Nominal Thread Size [CQJX]
- 0.875 Inches
- Included Contact Type [CXCL]
- Round Pin Single Mating End Single Contact Grouping
- Included Contact Quantity [CXCG]
- 12 Single Mating End Single Contact Grouping
- Insert Material Document And Classification [CTKL]
- Mil-M-14 Ty Sdg-F Mil Spec Single Material Response Single Mating End
- Insert Material [CQZG]
- Plastic Diallyl Phthalate Single Mating End
- Polarization Method [AFRN]
- Mating End
- Precious Material And Location [PMLC]
- Contact Surfaces Gold
- Precious Material And Weight [PMWT]
- 0.012 Gold Grains, Troy
- Precious Material [PRMT]
- Gold
- Shell Surface Treatment Document And Classification [CTBC]
- Qq-P-416 Ty 2,Cl 1 Fed Spec Single Treatment Response
- Shell Material [CSPT]
- Aluminum Alloy
- Shell Surface Treatment [CSWM]
- Cadmium
- Shell Type [AFRT]
- Solid
- Overall Length [ABHP]
- 1.090 Inches Maximum
- Specification/Standard Data [ZZZK]
- 96906-Ms24042 Government Standard
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Solder Well Single Mating End Single Contact Grouping
- Test Data Document [TEST]
- 81349-Mil-C-8384 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Series Designator [THSD]
- Unef
- Thread Quantity Per Inch [CMLP]
- 20
- Threaded Device Type [AFQR]
- Mounting Bushing
Weapon Systems (WSDC) 5935-00-931-4102
DLA Procurement Analysis 5935-00-931-4102
Management Data 5935-00-931-4102
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5935-00-931-4102
Freight Information 5935-00-931-4102
5935-00-931-4102 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-00-931-4102 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-00-931-4102 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5935-00-931-4102 is not classified as a special type of cargo when transported by water. 5935-00-931-4102 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-00-931-4102
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-DTL-17667, Neutral Wrapping Paper
- No Requirement
- Not Applicable
- --
- No special marking
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, Folding Paperboard Box
Contracting Technical Data File (CTDF) 5935-00-931-4102 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: