Premium Information is available for this item - Upgrade for $1 a day
5935-00-924-9601
Electrical Receptacle Connector
5935009249601 009249601 MILC26500 MS24264R18B31SN
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
January 2023
19
Marketplace 5935-00-924-9601
Request a Quotation from participating marketplace vendors
Related Documents 5935-00-924-9601 5+ Documents (More...)
MS24264R18B31SN CONNECTOR,RECEPTACLE,ELECTRICAL 2 EA NS Request Quotation Updated Every Day 5935-00-924
-9601 RQST NE Updated Every Day 5935-00-924-9601 RQST Updated Every Day 5935-00-924-9601 RQST NE Related
Electrical Receptacle Connector 009249601 Upgrade your Account Upgrade 5935-00-924-9601Electrical
Receptacle Connector5935009249601 009249601 MILC26500 Electrical Receptacle Connector 009887770 Upgrade
MILC26500 fsg-59/fsc-5935/us 5935-00-444-0209 Electrical Receptacle Connector 004440209 RNCC E RNVC
8 DAC 3 MILC26500 https//www.nsnlookup.com /fsg-59/fsc-5935/us 5935- https//www.nsnlookup.com /fsg-59
MS24264R18B31SN CONNECTOR,RECEPTACLE,ELECTRICAL 1 EA NS Request Quotation 5935-01-261-2230 CONNECTOR,
MS24264E18B31SN CONNECTOR,RECEPTACLE,ELECTRICAL 12 EA NS Request Quotation MS24264R18B31SN CONNECTOR,
Electrical Receptacle Connector 009249601 NS Request Quotation MS24264R18B31SN CONNECTOR, https
71MILC26500MS24264R18B8SNXMIL-DTL-83723 An electrical /71 M83723/71R2461N 013012397 MIL-DTL-83723 /71 M83723/71W20416 MILC26500
Restrictions 5935-00-924-9601
5935-00-924-9601 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains gold.
Import and Export 5935-00-924-9601
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-00-924-9601
- Israel (YD01)
- Effective Date:
- 1 Sep 2016
- France (ZF01)
- Effective Date:
- 1 Jun 2015
- United Kingdom (ZK01)
- Effective Date:
- 1 Nov 2008
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5935-00-924-9601
- Part Number
- Manufacturer
- Status
- MS24264R18B31SN
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- MILC26500
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5935-00-924-9601
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Distance From Mounting Shoulder To Front Face [AFQK]
- 0.708 Inches Minimum And 0.728 Inches Maximum
- Body Length [ADAQ]
- 1.625 Inches Minimum And 2.140 Inches Maximum
- Cable Entrance Diameter [AFQJ]
- 0.531 Inches Nominal
- Center To Center Distance Between Mounting Facilities Parallel To Height [AEBW]
- 1.062 Inches Nominal
- Connector Cable Strain Relief Method [AFRW]
- Cable Clamp
- Connector Locking Method [AFRV]
- Bayonet Pin
- Contact Material [CQTZ]
- Copper Alloy Single Mating End Single Contact Grouping
- Contact Removability [AFQZ]
- Removable Single Mating End Single Contact Grouping
- Contact Maximum Current Rating In Amps [AFRC]
- 7.5 Single Mating End Single Contact Grouping
- Contact Position Arrangement Style [AFQX]
- 18-31 Single Mating End
- Contact Surface Treatment Document And Classification [CRBJ]
- Mil-G-45204,Type 2,Class 2 Mil Spec Single Treatment Response Single Mating End Single Contact Grouping
- Contact Surface Treatment [CQYH]
- Gold Single Mating End Single Contact Grouping
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Width [AEHA]
- 1.062 Inches Nominal
- Environmental Protection [ADZC]
- Heat Resistant And Moisture Proof And Vibration Resistant
- Body Style [AAQL]
- Straight Shape, External Coupling Strain Relief
- Mating End Quantity [AFQW]
- 1
- Included Contact Type [CXCL]
- Round Socket Single Mating End Single Contact Grouping
- Included Contact Quantity [CXCG]
- 31 Single Mating End Single Contact Grouping
- Insert Position In Deg [AFRP]
- 0.0
- Polarization Method [AFRN]
- Keyway Or Multiple Keyway
- Precious Material And Location [PMLC]
- Contact Surfaces Gold
- Precious Material And Weight [PMWT]
- 0.031 Gold Grains, Troy
- Precious Material [PRMT]
- Gold
- Shell Material Document And Classification [CTHH]
- Qq-A-325,Comp 6061,Grade T6 Fed Spec Single Material Response
- Shell Material [CSPT]
- Aluminum Alloy 6061
- Shell Surface Treatment [CSWM]
- Anodize
- Shell Type [AFRT]
- Solid
- Overall Height [ABKW]
- 1.343 Inches Nominal
- Overall Width [ABMK]
- 1.343 Inches Nominal
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.116 Inches Minimum And 0.125 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-26500 Government Specification
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Crimp Single Mating End Single Contact Grouping
- Test Data Document [TEST]
- 81349-Mil-C-26500 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5935-00-924-9601
Management Data 5935-00-924-9601
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Nov 2007
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Navy (DN)
- N
- Z
- Discontinued-Use 5935-01-261-2230
- Z
- Defense Logistics Agency (DS)
- I
- Z
- Discontinued-Use 5935-01-261-2230
- Z
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5935-00-924-9601
Freight Information 5935-00-924-9601
5935-00-924-9601 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-00-924-9601 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-00-924-9601 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5935-00-924-9601 is not classified as a special type of cargo when transported by water. 5935-00-924-9601 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-00-924-9601
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566 or PPP-B-676, Folding or Setup Box
Contracting Technical Data File (CTDF) 5935-00-924-9601 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: