Premium Information is available for this item - Upgrade for $1 a day
5935-00-532-1708
Receptacle Dummy Connector
5935005321708 005321708 MIL-DTL-26482 MS3115-24W MS3115-24 MS3115-24L MS3115-24A MIL-C-26482 10135485
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel. View more Receptacle Dummy Connector
Managed by United States
NSN Created on 18 Jun 1969
Data Last Changed
November 2023
November 2023
NATO Update Count
29
29
NATO Data Quality
Marketplace 5935-00-532-1708
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
MS3115-24L DUMMY CONNECTOR,RECEPTACLE RQST NS
MIL-C-26482 DUMMY CONNECTOR,RECEPTACLE RQST NS
MS3115-24A DUMMY CONNECTOR,RECEPTACLE 4 EA NS
MS3115-24W DUMMY CONNECTOR,RECEPTACLE RQST NS
MS3115-24L DUMMY CONNECTOR,RECEPTACLE 25 EA NS
MIL-C-26482 DUMMY CONNECTOR,RECEPTACLE 8 EA NS
MS3115-24A DUMMY CONNECTOR,RECEPTACLE 25 EA NS
MS3115-24W DUMMY CONNECTOR,RECEPTACLE 25 EA NS
MILC26482 DUMMY CONNECTOR,RECEPTACLE 3 EA NS
Updated Every Day 5935-00-532-1708 RQST NE
Updated Every Day 5935-00-532-1708 RQST
Updated Every Day 5935-00-532-1708 RQST NE
Related Documents 5935-00-532-1708 5+ Documents (More...)
MIL-DTL-26482 MS3115-24W MS3115-24 MS3115-24L MIL-C-26482 MS3115-24A 10135485 An item specifically designed
MS3115-24L DUMMY CONNECTOR,RECEPTACLE RQST NS Request Quotation MIL-C-26482 DUMMY CONNECTOR,RECEPTACLE
RQST NS Request Quotation MS3115-24A DUMMY CONNECTOR,RECEPTACLE 4 EA NS Request Quotation MS3115-24W
MS3115-24L DUMMY CONNECTOR,RECEPTACLE RQST NS Request Quotation MIL-C-26482 DUMMY CONNECTOR,RECEPTACLE
RQST NS Request Quotation MS3115-24A DUMMY CONNECTOR,RECEPTACLE 4 EA NS Request Quotation MS3115-24W
MS3115-24W MIL-C-26482 An item specifically designed to mate with a plug connector to perform
MS3115-24W DUMMY CONNECTOR,RECEPTACLE RQST NS Request Quotation MIL-C-26482 DUMMY CONNECTOR,RECEPTACLE
Receptacle Dummy Connector 5935005321708 MS3115-24W MS3115-24 MS3115-24L MIL-C-26482 MS3115-24A
MS3115-24W DUMMY CONNECTOR,RECEPTACLE RQST NS Request Quotation MIL-C-26482 DUMMY CONNECTOR,RECEPTACLE
Receptacle Dummy Connector 5935005321708 MS3115-24W MS3115-24 MS3115-24L MIL-C-26482 MS3115-24A
JavaScript in your web browser . 5935-14-339-2315Receptacle Dummy Connector5935143392315 143392315 MS3115-24A
Receptacle Dummy Connector 5935005321708 United States (US) 4. 5935-00-532-1708 Marketplace Restrictions
Approved Sources Datasheet Management MS3115-24A DUMMY CONNECTOR,RECEPTACLE 17 EA NS Request Quotation
Receptacle Dummy Connector 5935005321708 United States (US) 4. 5935-00-532-1708 Marketplace Restrictions
Approved Sources Datasheet Management MS3115-24A DUMMY CONNECTOR,RECEPTACLE 17 EA NS Request Quotation
MS3114E20-39PX MIL-C-26482 An electrical fitting with electrical contacts constructed to be affixed
MILC26482 CONNECTOR,RECEPTACLE,ELECTRICAL 3 EA NS Request Quotation MIL-C-26482 CONNECTOR,RECEPTACLE,
An electrical fitting with electrical contacts constructed to be affixed MIL-C-26482 CONNECTOR,
MILC26482 CONNECTOR,RECEPTACLE,ELECTRICAL 3 EA NS Request Quotation MIL-C-26482 CONNECTOR,RECEPTACLE,
An electrical fitting with electrical contacts constructed to be affixed MIL-C-26482 CONNECTOR,
MS3181-22CL MIL-C-26482 A device specifically designed to fully or partially inclose an electrical
MIL-C-26482 COVER,ELECTRICAL CONNECTOR 5 EA NS Request Quotation Subscribe to View Vendor Details...
An electrical fitting with electrical contacts, constructed to be affixed MIL-C-26482 CONNECTOR
MIL-C-26482 COVER,ELECTRICAL CONNECTOR 5 EA NS Request Quotation Subscribe to View Vendor Details...
An electrical fitting with electrical contacts, constructed to be affixed MIL-C-26482 CONNECTOR
Restrictions 5935-00-532-1708
5935-00-532-1708 is a Receptacle Dummy Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 5935-00-532-1708
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-00-532-1708
- US Army (A918)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- A196
- Supplementary Receivers:
- CT
- US Coast Guard (C919)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- C008
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTKEHD
- Finland (WF01)
- Effective Date:
- 1 Dec 2009
- Poland (WP01)
- Effective Date:
- 1 Jun 2011
- Brazil (YA01)
- Effective Date:
- 1 Oct 2001
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Jul 2011
- Denmark (ZS01)
- Effective Date:
- 1 Jun 2005
- Greece (ZU01)
- Effective Date:
- 1 Jul 2005
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 5935-00-532-1708
- Part Number
- Manufacturer
- Status
- MS3115-24L
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- MIL-DTL-26482
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MS3115-24A
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MIL-C-26482
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 10135485
- A486G - Nimikkeistokeskus Ncb Finland (Active)
- NATO Reference
- NATO Reference
- MS3115-24W
- 96906 - Military Standards (Active)
- Advisory Reference
- Advisory Reference
- MS3115-24
- 96906 - Military Standards (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5935-00-532-1708
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Distance From Mounting Shoulder To Front Face [AFQK]
- 0.589 Inches Minimum And 0.620 Inches Maximum
- Center To Center Distance Between Mounting Facilities Parallel To Height [AEBW]
- 1.375 Inches Nominal
- Connector Locking Method [AFRV]
- Bayonet Pin
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Width [AEHA]
- 1.375 Inches Nominal
- Environmental Protection [ADZC]
- Moisture Resistant And Salt Water Resistant And Vibration Resistant
- Mating End Quantity [AFQW]
- 1
- Insert Material [CQZG]
- Rubber Silicone Single Mating End
- Shell Material [CSPT]
- Aluminum Alloy
- Shell Surface Treatment Document And Classification [CTBC]
- Qq-P-416,Ty 2,Cl 3 Fed Spec Single Treatment Response
- Shell Surface Treatment [CSWM]
- Cadmium
- Shell Type [AFRT]
- Solid
- Overall Height [ABKW]
- 1.703 Inches Maximum
- Overall Length [ABHP]
- 0.683 Inches Nominal
- Overall Width [ABMK]
- 1.703 Inches Maximum
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.142 Inches Minimum And 0.152 Inches Maximum
- Specification/Standard Data [ZZZK]
- 96906-Ms3115 Government Standard
- Test Data Document [TEST]
- 81349-Mil-C-26482 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5935-00-532-1708
DLA Procurement Analysis 5935-00-532-1708
- Last Stock Position:
- 137 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5935-00-532-1708
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- CC
- Other Aircraft Categories
Multi-Application Aviation Spares
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5935-00-532-1708
5935-99-385-4542 5935-14-362-6142 5935-15-147-2997 5935-14-565-7347 5935-14-507-2427 5935-99-761-2511 5935-14-480-9387 5935-14-565-5671 5935-99-551-7378 5935-14-570-0823 5935-14-542-0977 5935-14-479-8548 5935-14-535-9550 5935-14-386-8438 5935-12-360-2502 5935-12-371-2463 5935-99-500-3712 5935-14-363-4883
Freight Information 5935-00-532-1708
5935-00-532-1708 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-00-532-1708 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-00-532-1708 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5935-00-532-1708 is not classified as a special type of cargo when transported by water. 5935-00-532-1708 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-00-532-1708
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5935-00-532-1708 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: