Premium Information is available for this item - Upgrade for $1 a day
5935-00-482-0333
Tip Jack
5935004820333 004820333 105-0857 5175113-005 579R927H05
An electrical fitting with a female contact arranged for the insertion of a PLUG, TIP or a TIP, TEST PROD. It has a single facility for attachment of a conductor or facility for circuit connection through its mounting provisions. The item may or may not be insulated. Excludes multisection types each section of which consists of a single contact spring or telephone-type jack. Excludes CONNECTOR, RECEPTACLE ELECTRICAL; JACK, TELEPHONE; JACK ASSEMBLY, TIP; and POST, BINDING. View more Tip Jack
May 2023
31
Marketplace 5935-00-482-0333
Request a Quotation from participating marketplace vendors
Related Documents 5935-00-482-0333 5+ Documents (More...)
Request a Quotation from participating marketplace vendors Request Updated Every Day 3040-17-105-0857
RQST NE Updated Every Day 3040-17-105-0857 RQST Updated Every Day 3040-17-105-0857 RQST NE Restrictions
BUY NE FedMall Updated Every Day 5996-00-105-0857 RQST NE Updated Every Day 5996-00-105-0857 RQST Updated
Every Day 5996-00-105-0857 RQST NE Restrictions 5996-00-105-0857 DEMIL: C | DEMILI : | CRITICALITY :
RQST NE Updated Every Day 6220-33-105-0857 RQST Updated Every Day 6220-33-105-0857 RQST NE Related Documents
6220-33-105-0857 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/fr 3040-14-475-0431
New Zealand (NZ) 4. 7690-98-105-0857 Marketplace Restrictions Approved Sources Datasheet Management Open
Request a Quotation from participating marketplace vendors Request Updated Every Day 7690-98-105-0857
Request a Quotation from participating marketplace vendors Request Updated Every Day 5962-01-105-0857
RQST Updated Every Day 5962-01-105-0857 RQST NE Restrictions 5962-01-105-0857 DEMIL: B | DEMILI : |
Restrictions 5935-00-482-0333
5935-00-482-0333 is a Tip Jack that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains Silver.
Import and Export 5935-00-482-0333
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-00-482-0333
- US Air Force (FUGX)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FUTX
- US Navy (N9BN)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HD
- Poland (WP01)
- Effective Date:
- 1 Sep 2006
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
- NATO Maintenance and Supply Agency (ZX01)
- Effective Date:
- 1 Nov 2013
Approved Sources 5935-00-482-0333
- Part Number
- Manufacturer
- Status
- 105-0857
- Manufacturer
- 74970 - Viking Technologies, Ltd. (Replaced)
- Original Design
- Original Design
- 579R927H05
- 48306 - Northrop Grumman Support Services (Active)
- Secondary Buy
- Secondary Buy
- 579R927H05
- 97942 - Northrop Grumman Systems Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 105-0857
- 71313 - Viking Technologies, Ltd. (Active)
- Advisory Reference
- Advisory Reference
- 5175113-005
- 53711 - Naval Sea Systems Command (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5935-00-482-0333
- Characteristic
- Specifications
- FIIG
- Specifications
- A03400
- Electrical Insulation Feature [AALV]
- Insulated Completely
- Body Length [ADAQ]
- 0.290 Inches Minimum And 0.330 Inches Maximum
- Body Style [AAQL]
- Press Fit
- Current Rating In Amps [AMPS]
- 5.0
- Finger Accommodation Diameter [AFXY]
- 0.079 Inches Minimum And 0.081 Inches Maximum Single Finger
- Finger Accommodation Length [AFXZ]
- 0.250 Inches Nominal Single Finger
- Identification Code Color [AAPC]
- Yellow
- Accommodated Finger Type [AFXS]
- Test Prod Single Finger
- Material [MATT]
- Copper Alloy Spring
- Material [MATT]
- Copper Alloy Terminal
- Material [MATT]
- Plastic Polyamide Body
- Material [MATT]
- Plastic Polyamide Insulator
- Maximum Voltage Rating In Volts [AFXE]
- 1500.0 Ac
- Precious Material And Location [PMLC]
- Spring Surface Silver
- Precious Material [PRMT]
- Silver
- Overall Diameter [ADAV]
- 0.170 Inches Minimum And 0.210 Inches Maximum
- Overall Length [ABHP]
- 0.430 Inches Nominal
- Surface Treatment [SFTT]
- Nickel Terminal
- Surface Treatment [SFTT]
- Silver Spring
- Terminal Type [CSCF]
- Pin
- Test Data Document [TEST]
- 97942-579R927 Drawing (This Is The Basic Governing Drawing, Such As A Contractor Drawing, Original Equipment Manufacturer Drawing, Etc.; Excludes Any Specification, Standard Or Other Document That May Be Referenced In A Basic Governing Drawing)
Weapon Systems (WSDC) 5935-00-482-0333
DLA Procurement Analysis 5935-00-482-0333
Management Data 5935-00-482-0333
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- BF
- F-4 (PHANTOM II)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5935-00-482-0333
Freight Information 5935-00-482-0333
5935-00-482-0333 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-00-482-0333 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-00-482-0333 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5935-00-482-0333 is not classified as a special type of cargo when transported by water. 5935-00-482-0333 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-00-482-0333
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-DTL-17667, Neutral Wrapping Paper
- No Requirement
- Not Applicable
- --
- No special marking
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5935-00-482-0333 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: