Premium Information is available for this item - Upgrade for $1 a day
5935-00-368-2884
Electrical Receptacle Connector
5935003682884 003682884 MIL-DTL-28748/10 M28748/10G0WO1A MILC28748-10 MS18166-2W
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
November 2023
7
Marketplace 5935-00-368-2884
Request a Quotation from participating marketplace vendors
Related Documents 5935-00-368-2884 5+ Documents (More...)
CONNECTOR,RECEPTACLE,ELECTRICAL RQST NS Request Quotation Updated Every Day 5935-00-368-2884 RQST
NE Updated Every Day 5935-00-368-2884 RQST Updated Every Day 5935-00-368-2884 RQST NE Related Documents
Electrical Receptacle Connector 003682884 M28748/10G0WO1A MILC28748-10 MS18166-2W An electrical
An electrical fitting with electrical contacts constructed MS18166-2W An electrical fitting with
M28748/10C0BL1A MILC28748-10 An electrical fitting with electrical contacts constructed to be affixed
MIL-DTL-28748/10 CONNECTOR,RECEPTACLE,ELECTRICAL 109 EA NS Request Quotation Subscribe to View Vendor
Electrical Receptacle Connector 003682884 M28748/10G0WO1A MILC28748-10 MS18166-2W An electrical
fitting with electrical contacts constructed M28748/10F0NO2A MILC28748-10 An electrical fitting with
4118905-52 M28748/10D0NO2A MILC28748-10 An electrical fitting with electrical contacts constructed
Electrical Receptacle Connector 003682884 M28748/10G0WO1A MILC28748-10 MS18166-2W An electrical
Restrictions 5935-00-368-2884
5935-00-368-2884 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 5935-00-368-2884
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-00-368-2884
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTKE
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 May 2001
Approved Sources 5935-00-368-2884
- Part Number
- Manufacturer
- Status
- M28748/10G0WO1A
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-DTL-28748/10
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILC28748-10
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MS18166-2W
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5935-00-368-2884
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Distance From Mounting Shoulder To Front Face [AFQK]
- 0.537 Inches Nominal
- Center To Center Distance Between Mounting Facilities Parallel To Height [AEBW]
- 1.750 Inches Minimum And 1.770 Inches Maximum
- Connector Locking Method [AFRV]
- Screw
- Contact Material [CQTZ]
- Copper Alloy Single Mating End Single Contact Grouping
- Contact Maximum Current Rating In Amps [AFRC]
- 13.0 Single Mating End Single Contact Grouping
- Contact Removability [AFQZ]
- Removable Single Mating End Single Contact Grouping
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Width [AEHA]
- 2.495 Inches Minimum And 2.505 Inches Maximum
- Environmental Protection [ADZC]
- Moisture Resistant And Salt Water Resistant And Vibration Resistant
- Body Style [AAQL]
- Straight Shape
- Mating End Quantity [AFQW]
- 1
- Nominal Thread Length [AKMG]
- 0.250 Inches
- Nominal Thread Size [CQJX]
- 0.250 Inches
- Included Contact Type [CXCL]
- Round Socket Single Mating End Single Contact Grouping
- Included Contact Quantity [CXCG]
- 128 Single Mating End Single Contact Grouping
- Insert Material Document And Classification [CTKL]
- Mil-M-14,Type Sdg-F Mil Spec Single Material Response Single Mating End Or Mil-P-19833,Type Gdi-30F Mil Spec Single Material Response Single Mating End
- Insert Material [CQZG]
- Plastic Diallyl Phthalate Single Mating End
- Polarization Method [AFRN]
- Polarization Boss
- Overall Height [ABKW]
- 1.850 Inches Minimum And 1.870 Inches Maximum
- Overall Length [ABHP]
- 1.210 Inches Nominal
- Overall Width [ABMK]
- 2.865 Inches Minimum And 2.885 Inches Maximum
- Special Features [FEAT]
- Polarized At Position A Rotated 90 Deg,B Rotated 135 Deg
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-28748/10 Government Specification
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Crimp Single Mating End Single Contact Grouping
- Test Data Document [TEST]
- 81349-Mil-C-28748 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 2B
- Thread Quantity Per Inch [CMLP]
- 28
- Thread Series Designator [THSD]
- Unf
- Threaded Device Type [AFQR]
- Coupling Facility
Weapon Systems (WSDC) 5935-00-368-2884
DLA Procurement Analysis 5935-00-368-2884
- Last Stock Position:
- 5 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5935-00-368-2884
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5935-00-368-2884
Freight Information 5935-00-368-2884
5935-00-368-2884 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-00-368-2884 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-00-368-2884 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-00-368-2884 is not classified as a special type of cargo when transported by water. 5935-00-368-2884 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-00-368-2884
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5935-00-368-2884 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: