Premium Information is available for this item - Upgrade for $1 a day
5935-00-234-0244
Electrical Connector Backshell
5935002340244 002340244 MIL-DTL-28748 MS18192-S1 MIL-C-28748
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables.It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device.It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions. View more Electrical Connector Backshell
May 2023
5
Marketplace 5935-00-234-0244
Request a Quotation from participating marketplace vendors
Related Documents 5935-00-234-0244 5+ Documents (More...)
Electrical Connector Backshell 5935002340244 5935-00-234-0244 5935002340244 002340244 is an item
An insulating element with or without contact(s) designed to fit /1 MIL-C-28748 /3 An insulating
element MS18180-1 339212-1 MRAC42P M28748/3-G0001A MIL-C-28748/3 /1 MIL-C-28748 /3 An insulating element
/1 M28748/1-G00G1A MIL-C-28748/1 MIL-DTL-28748/3 M28748/3-F00FIA M28748-3F00F1A M28748-3F00FIA
M28748/3-F00F1A M28748/1-D00F1A MIL-C-28748/1 MIL-DTL-28748/3 M28748/3-F00FIA M28748-3F00F1A M28748-3F00FIA
M28748/1-G00G1A MIL-C-28748/1 MIL-DTL-28748/3 M28748/3-F00FIA M28748-3F00F1A M28748-3F00FIA M28748/3-
/1 MIL-DTL-28748/3 M28748/3-F00FIA M28748-3F00F1A M28748-3F00FIA /1 M28748/1-G00G1A MIL-C-28748/
M28748/1-G00G1A MIL-C-28748/1 MIL-DTL-28748/3 M28748/3-F00FIA M28748-3F00F1A M28748-3F00FIA M28748/3-
/1 MIL-DTL-28748/3 M28748/3-F00FIA M28748-3F00F1A M28748-3F00FIA /1 M28748/1-G00G1A MIL-C-28748/
Restrictions 5935-00-234-0244
5935-00-234-0244 is a Electrical Connector Backshell that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5935-00-234-0244
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-00-234-0244
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Supplementary Collaborators:
- HD
Approved Sources 5935-00-234-0244
- Part Number
- Manufacturer
- Status
- MS18192-S1
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- MIL-DTL-28748
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-28748
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5935-00-234-0244
- Characteristic
- Specifications
- FIIG
- Specifications
- A10100
- Cable Opening Quantity [AKRD]
- 1
- Cable Opening Diameter [AGTW]
- 0.190 Inches Minimum
- Center To Center Distance Between Mounting Facilities Parallel To Length [ABKQ]
- 0.928 Inches Minimum And 0.948 Inches Maximum
- Material [MATT]
- Aluminum Alloy
- Mounting Facility Type And Quantity [AXHR]
- 2 Unthreaded Hole
- Size Designation [ALJP]
- 14
- Overall Height [ABKW]
- 1.180 Inches Minimum And 1.350 Inches Maximum
- Overall Length [ABHP]
- 1.870 Inches Nominal
- Overall Width [ABMK]
- 0.484 Inches Minimum And 0.516 Inches Maximum
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.119 Inches Minimum And 0.124 Inches Maximum
- Specification/Standard Data [ZZZK]
- 96906-Ms18192 Government Standard
- Style Designator [STYL]
- Hood, Side Opening W/Clamp
- Surface Treatment [SFTT]
- Anodize
- Test Data Document [TEST]
- 81349-Mil-C-28748 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5935-00-234-0244
Management Data 5935-00-234-0244
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5935-00-234-0244
Freight Information 5935-00-234-0244
5935-00-234-0244 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-00-234-0244 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-00-234-0244 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-00-234-0244 is not classified as a special type of cargo when transported by water. 5935-00-234-0244 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-00-234-0244
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5935-00-234-0244 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: