Premium Information is available for this item - Upgrade for $1 a day
5935-00-121-3884
Electrical Receptacle Connector
5935001213884 001213884 MIL-DTL-83723/72 M83723/72R14076 MILC83723-72
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
November 2023
10
Marketplace 5935-00-121-3884
Request a Quotation from participating marketplace vendors
Related Documents 5935-00-121-3884 5+ Documents (More...)
United States (US) 4. 5935-00-121-3884 Marketplace Restrictions Approved Sources Datasheet Management
RQST NE Updated Every Day 5935-00-121-3884 RQST Updated Every Day 5935-00-121-3884 RQST NE Related
Electrical Receptacle Connector 001213884 a day Upgrade your Account Upgrade 5935-00-121-3884Electrical
Receptacle Connector5935001213884 001213884 ) https//www.nsnlookup.com /fsg-59/fsc-5935/us 5935-00-121
https//www.nsnlookup.com /fsg-59/fsc-5935/us 5935-00-121-3884 Electrical Receptacle Connector 001213884
M83723/72R14076 MILC83723-72 An electrical fitting with electrical contacts constructed to be affixed
An electrical fitting with electrical contacts constructed to be affixed MILC83723-72 An electrical
5935PL0657645 An electrical fitting with electrical MIL-DTL-83723/72 CONNECTOR,RECEPTACLE,ELECTRICAL
M83723/72R22126 MILC83723-72 An electrical fitting with electrical contacts constructed to be affixed
5935PL0668323 An electrical fitting with electrical contacts constructed M83723/72R2212N MILC83723-72
Restrictions 5935-00-121-3884
5935-00-121-3884 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains gold.
Import and Export 5935-00-121-3884
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-00-121-3884
- US Army (A918)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A196
- Supplementary Receivers:
- CT
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- Brazil (YA01)
- Effective Date:
- 1 Aug 2000
- France (ZF01)
- Effective Date:
- 1 Oct 2005
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5935-00-121-3884
- Part Number
- Manufacturer
- Status
- M83723/72R14076
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-DTL-83723/72
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILC83723-72
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5935-00-121-3884
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Distance From Mounting Shoulder To Front Face [AFQK]
- 0.708 Inches Minimum And 0.728 Inches Maximum
- Center To Center Distance Between Mounting Facilities Parallel To Height [AEBW]
- 0.901 Inches Minimum And 0.911 Inches Maximum
- Connector Locking Method [AFRV]
- Bayonet Pin
- Contact Material [CQTZ]
- Copper Alloy Single Mating End Single Contact Grouping
- Contact Removability [AFQZ]
- Removable Single Mating End Single Contact Grouping
- Contact Position Arrangement Style [AFQX]
- 11-99 Single Mating End
- Contact Surface Treatment Document And Classification [CRBJ]
- Mil-G-45204,Type 2,Class 1 Mil Spec Single Treatment Response Single Mating End Single Contact Grouping
- Contact Surface Treatment [CQYH]
- Gold Single Mating End Single Contact Grouping
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Width [AEHA]
- 0.901 Inches Minimum And 0.911 Inches Maximum
- Environmental Protection [ADZC]
- Pressure Proof And Moisture Resistant And Vibration Proof
- Body Style [AAQL]
- Straight Shape, External Coupling
- Mating End Quantity [AFQW]
- 1
- Nominal Thread Length [AKMG]
- 0.290 Inches
- Nominal Thread Size [CQJX]
- 0.875 Inches
- Included Contact Quantity [CXCG]
- 7 Single Mating End Single Contact Grouping
- Included Contact Type [CXCL]
- Round Pin Single Mating End Single Contact Grouping
- Insert Position In Deg [AFRP]
- 18.0 And 149.0 And 192.0 And 259.0
- Polarization Method [AFRN]
- Keyway Or Multiple Keyway
- Precious Material And Location [PMLC]
- Contact Surfaces Gold
- Precious Material And Weight [PMWT]
- 0.007 Gold Grains, Troy
- Precious Material [PRMT]
- Gold
- Shell Material Document And Classification [CTHH]
- Qq-A-367 Fed Spec Single Material Response
- Shell Material [CSPT]
- Aluminum Alloy
- Shell Type [AFRT]
- Solid
- Overall Height [ABKW]
- 1.120 Inches Minimum And 1.130 Inches Maximum
- Overall Length [ABHP]
- 1.300 Inches Maximum
- Overall Width [ABMK]
- 1.120 Inches Minimum And 1.130 Inches Maximum
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.115 Inches Minimum And 0.125 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-83723/72 Government Specification
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Crimp Single Mating End Single Contact Grouping
- Test Data Document [TEST]
- 81349-Mil-C-83723 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Series Designator [THSD]
- Unef
- Threaded Device Type [AFQR]
- Back Shell
Weapon Systems (WSDC) 5935-00-121-3884
DLA Procurement Analysis 5935-00-121-3884
- Last Stock Position:
- 4 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5935-00-121-3884
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5935-00-121-3884
Freight Information 5935-00-121-3884
5935-00-121-3884 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-00-121-3884 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-00-121-3884 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-00-121-3884 is not classified as a special type of cargo when transported by water. 5935-00-121-3884 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-00-121-3884
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 1.3" H x 1.1" W x 1.1" L
- --
- --
- --
- Any Suitable Process
- 1.3" H x 1.1" W x 1.1" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5935-00-121-3884 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: