Premium Information is available for this item - Upgrade for $1 a day
5935-00-050-1322
Plug-In Electronic Components Socket
5935000501322 000501322 737230-03 HRTS617J
An item designed to electrically connect and mechanically position the base of an item having plug-in-type contacts, and to facilitate replacement of the item accommodated. It includes sockets which accommodate the contacts of capacitors, coils, crystals, electron tubes, relays, semiconductor devices and vibrators. Excludes sockets or receptacles designed to accommodate plug-in component circuit boards (printed circuit boards) and electronic modules or sub-assemblies. Also excludes heat-dissipating (not heat-sinks) sockets for mounting "power transistors". View more Plug-In Electronic Components Socket
August 2023
19
Marketplace 5935-00-050-1322
Request a Quotation from participating marketplace vendors
Related Documents 5935-00-050-1322 5+ Documents (More...)
(Identification) 1/3 NSN 5935-00-050-1322 (Identification) 2/3 NSN 5935-00-050-1322 (Identification
RQST NE Updated Every Day 5935-00-050-1322 RQST Updated Every Day 5935-00-050-1322 RQST NE Related Documents
Components Socket your Account Upgrade 5935-00-050-1322Plug-In Electronic Components Socket5935000501322 000501322
1322Plug-In 5340-33-000-6705 Retaining Strap 5340330006705330006705 Components Socket5935000501322 000501322
737230 your Account Upgrade 5935-00-050-1322Plug-In https//www.nsnlookup.com /fsg-59/fsc-5935/us 5935-00-050-1322
Components Socket your Account Upgrade 5935-00-050-1322Plug-In Electronic Components Socket5935000501322 000501322
-23-111-0378 Electrical Special Purpose Cable Assembly Electronic Components Socket5935000501322 000501322
5340330006705 330006705 Components Socket5935000501322 https//www.nsnlookup.com /fsg-59/fsc-5935/us 5935-00-050-1322
HRTS618J 737230 5340-33-000-6705 Retaining Strap 5340330006705 330006705 Components Socket5935000501322 000501322
Restrictions 5935-00-050-1322
5935-00-050-1322 is a Plug-In Electronic Components Socket that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains a combination of two or more precious metals.
Import and Export 5935-00-050-1322
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-00-050-1322
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTKE
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Kuwait (YK01)
- Effective Date:
- 1 Jan 2015
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Jul 2005
Approved Sources 5935-00-050-1322
- Part Number
- Manufacturer
- Status
- 737230-03
- Manufacturer
- 35351 - Ge Aviation Systems Llc (Active)
- Primary Buy
- Primary Buy
- HRTS617J
- 91663 - Armel De Llc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5935-00-050-1322
- Characteristic
- Specifications
- FIIG
- Specifications
- A02300
- Accommodated Contact Quantity [AFRL]
- 8
- Body Material [AAFZ]
- Brass
- Body Mounting Hole Accommodation Length [ADAJ]
- 0.776 Inches Minimum And 0.786 Inches Maximum
- Body Mounting Hole Accommodation Width [ADAK]
- 0.401 Inches Minimum And 0.411 Inches Maximum
- Body Style [AAQL]
- Top Mount W/Studs
- Center To Center Distance Between Outside Mounting Holes Along Length [AGVA]
- 0.995 Nominal Mils And 1.005 Nominal Centimeters
- Center To Center Distance Between Outside Mounting Holes Along Width [AGVB]
- 0.120 Inches Minimum And 0.130 Inches Maximum
- Contact Maximum Current Rating In Amps [AFRC]
- 3.0
- Contact Material [AFRG]
- Phosphor Bronze
- Contact Position Arrangement Style [CRPY]
- Dual In Line
- Contact Surface Treatment [AFRH]
- Gold And Silver
- Mounting Hole Diameter [ABTB]
- 0.140 Nominal Mils And 0.150 Nominal Centimeters
- Mounting Hole Style [AEVB]
- Rectangular, W/Two Mounting Holes/Slots
- Mounting Method [AXGY]
- Threaded Stud
- Mounting Type For Which Designed [BCNX]
- Chassis
- Nominal Thread Size [CQJX]
- 0.138 Inches
- Precious Material And Location [PMLC]
- Contact Surfaces Gold And Contact Surfaces Silver
- Precious Material And Weight [PMWT]
- 0.008 Gold Grains, Troy And 0.008 Silver Grains, Troy
- Precious Material [PRMT]
- Gold And Silver
- Overall Height [ABKW]
- 0.625 Inches Maximum
- Overall Length [ABHP]
- 1.266 Inches Maximum
- Overall Width [ABMK]
- 0.395 Inches Maximum
- Terminal Type And Quantity [TTQY]
- 8 Solder Well
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Quantity Per Inch [CMLP]
- 32
- Thread Series Designator [THSD]
- Unc
Weapon Systems (WSDC) 5935-00-050-1322
DLA Procurement Analysis 5935-00-050-1322
Management Data 5935-00-050-1322
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5935-00-050-1322
Freight Information 5935-00-050-1322
5935-00-050-1322 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-00-050-1322 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-00-050-1322 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 723 for ocean manifesting and military sealift. 5935-00-050-1322 is not classified as a special type of cargo when transported by water. 5935-00-050-1322 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-00-050-1322
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 1.3" H x 0.4" W x 0.6" L
- --
- --
- --
- Any Suitable Process
- 1.3" H x 0.4" W x 0.6" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-DTL-17667, Neutral Wrapping Paper
- No Requirement
- Not Applicable
- --
- No special marking
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5935-00-050-1322 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: