Premium Information is available for this item - Upgrade for $1 a day
5935-00-043-1327
Electrical Receptacle Connector
5935000431327 000431327 903062-19 UMI34M1SLR UMI34M1SLR007003 EMM34-22PGDS25-5ONI 903062-0019 UMI34MISLR007003 UMI34MISLR
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
August 2023
24
Marketplace 5935-00-043-1327
Request a Quotation from participating marketplace vendors
Related Documents 5935-00-043-1327 3+ Documents (More...)
... 903062-19 CONNECTOR,RECEPTACLE,ELECTRICAL 5 EA NS Request Quotation Updated Every Day 5935-00-043
-1327 RQST NE Updated Every Day 5935-00-043-1327 RQST Updated Every Day 5935-00-043-1327 RQST NE Related
Electrical Receptacle Connector 000431327 https//www.nsnlookup.com /fsg-59/fsc-5935/us 5935 https
Navy (DN)NZDiscontinued-Use 5935-00-043-1327Defense Logistics Agency (DS)IZDiscontinued-Use 5935-00-043-1327
Electrical Receptacle Connector 000431327 Upgrade your Account Upgrade 5935-00-043-1327Electrical
Receptacle Connector5935000431327 000431327 903062 -19 UMI34M1SLR UMI34M1SLR007003 EMM34-22PGDS25-5ONI
Restrictions 5935-00-043-1327
5935-00-043-1327 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains gold.
Import and Export 5935-00-043-1327
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-00-043-1327
- US Army (A918)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- A196
- Supplementary Receivers:
- CL
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
- Spain (YB01)
- Effective Date:
- 1 Jul 2003
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5935-00-043-1327
- Part Number
- Manufacturer
- Status
- 903062-19
- Manufacturer
- 06481 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- UMI34M1SLR
- 81312 - Winchester Interconnect Corporation (Active)
- Secondary Buy
- Secondary Buy
- UMI34M1SLR007003
- 81312 - Winchester Interconnect Corporation (Active)
- Secondary Buy
- Secondary Buy
- EMM34-22PGDS25-5ONI
- 06481 - Northrop Grumman Systems Corporation (Active)
- Secondary Buy
- Secondary Buy
- 903062-0019
- 06481 - Northrop Grumman Systems Corporation (Active)
- Secondary Buy
- Secondary Buy
- UMI34MISLR007003
- 97954 - U S Components Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- UMI34MISLR
- 97954 - U S Components Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5935-00-043-1327
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Connector Locking Method [AFRV]
- Jackscrew-Socket
- Contact Material [CQTZ]
- Copper Alloy Single Mating End Single Contact Grouping
- Contact Maximum Current Rating In Amps [AFRC]
- 3.0 Single Mating End Single Contact Grouping
- Contact Removability [AFQZ]
- Nonremovable Single Mating End Single Contact Grouping
- Contact Position Arrangement Style [AFQX]
- 34 Single Mating End
- Contact Surface Treatment Document And Classification [CRBJ]
- Mil-G-45204,Ty 2,Cl 1 Mil Spec 1St Treatment Response Single Mating End Single Contact Grouping And Qq-N-290,Cl 2 Fed Spec 2Nd Treatment Response Single Mating End Single Contact Grouping
- Contact Surface Treatment [CQYH]
- Gold Single Mating End Single Contact Grouping And Nickel Single Mating End Single Contact Grouping
- Distance Between Mounting Facility Centers [AEJN]
- 1.027 Inches Minimum And 1.037 Inches Maximum
- Environmental Protection [ADZC]
- Salt Water Resistant And Vibration Resistant
- Body Style [AAQL]
- Straight Shape
- Mating End Quantity [AFQW]
- 1
- Nominal Thread Size [CQJX]
- 0.086 Inches And 0.086 Inches And 0.086 Inches
- Precious Material And Location [PMLC]
- Contact Surface Gold
- Precious Material [PRMT]
- Gold
- Included Contact Type [CXCL]
- Round Pin Single Mating End Single Contact Grouping
- Included Contact Quantity [CXCG]
- 34 Single Mating End Single Contact Grouping
- Insert Material [CQZG]
- Plastic Single Mating End
- Polarization Method [AFRN]
- Jackscrew
- Precious Material And Weight [PMWT]
- 0.034 Gold Grains, Troy
- Overall Height [ABKW]
- 0.615 Inches Minimum And 0.645 Inches Maximum
- Overall Length [ABHP]
- 1.235 Inches Minimum And 1.265 Inches Maximum
- Overall Width [ABMK]
- 0.365 Inches Minimum And 0.395 Inches Maximum
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Solder Well Single Mating End Single Contact Grouping
- Test Data Document [TEST]
- 06481-903062 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 2A And 2B And 2A
- Thread Direction [AAJF]
- Right-Hand And Right-Hand And Right-Hand
- Thread Quantity Per Inch [CMLP]
- 56 And 56
- Thread Series Designator [THSD]
- Unc And Unc And Unc
- Threaded Device Type [AFQR]
- Coupling Facility And Mounting Stud
DLA Procurement Analysis 5935-00-043-1327
Management Data 5935-00-043-1327
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5935-00-043-1327
Freight Information 5935-00-043-1327
5935-00-043-1327 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-00-043-1327 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-00-043-1327 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-00-043-1327 is not classified as a special type of cargo when transported by water. 5935-00-043-1327 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-00-043-1327
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 1.3" H x 0.6" W x 0.4" L
- --
- --
- --
- Any Suitable Process
- 1.3" H x 0.6" W x 0.4" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5935-00-043-1327 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: