5935-12-194-6722

Plug Connector T3108000RNCC: 5 | RNVC: 9 | DAC: 93108000RNCC: 5 | RNVC: 9 | DAC: 9 22 Nov 1979 5935-12-194-6722

5995-00-018-6023 5995000186023 000186023

5365-01-018-6023 5365010186023 010186023 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

4520-27-018-6023 4520270186023 270186023 is a heat transferring unit designed to transfer heat to surrounding air by radiation. the unit is exposed directly to the space served and it is generally connected to some type of heat generating unit, such as a steam or hot water heating boiler, but may have an integral gas or electric heating unit. excludes heater, convection, steam-hot water.

3110-14-351-7860 3110143517860 143517860 is a comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.