Premium Information is available for this item - Upgrade for $1 a day
5930-01-361-6339
Code Indicating Wheel Switch
5930013616339 013616339 MIL-PRF-22710/15 M22710/15-008 MIL-S-22710/15
A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing. View more Code Indicating Wheel Switch
May 2023
3
Marketplace 5930-01-361-6339
Request a Quotation from participating marketplace vendors
Related Documents 5930-01-361-6339 5+ Documents (More...)
RQST NE Updated Every Day 5930-01-361-6339 RQST Updated Every Day 5930-01-361-6339 RQST NE Related Documents
5930-01-361-6339 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-59/fsc-5930/us 5930-01-361-6339
A switch which is externally actuated by a thumbwheel and/or pushbutton M22710/15-121 MIL-S-22710/15
Code Indicating Wheel Switch 5930013616339 Upgrade your Account Upgrade 5930-01-361-6339Code Indicating
A switch which is externally actuated by a thumbwheel and/or pushbutton MIL-S-22710/15 A switch which
A switch which is externally actuated by a thumbwheel and/or pushbutton M22710/15-753 MIL-S-22710/15
Code Indicating Wheel Switch 5930013616339 M22710/15-008 MIL-S-22710/15 A switch which is externally
actuated by a thumbwheel and/or pushbutton M22710/15-072 MIL-S-22710/15 A switch which is externally
A switch which is externally actuated by a thumbwheel and/or pushbutton M22710/15-072 MIL-S-22710/15
Wheel Switch5930013616339 013616339 MIL-PRF-22710/15 M22710/15-008 MIL-S-22710/15 A switch which is
Restrictions 5930-01-361-6339
5930-01-361-6339 is a Code Indicating Wheel Switch that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5930-01-361-6339
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5930-01-361-6339
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
- Poland (WP01)
- Effective Date:
- 1 Sep 2007
Approved Sources 5930-01-361-6339
- Part Number
- Manufacturer
- Status
- M22710/15-008
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-22710/15
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-S-22710/15
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5930-01-361-6339
- Characteristic
- Specifications
- FIIG
- Specifications
- A052B0
- Actuator Type [AYDW]
- Thumbwheel All Actuators
- Color [HUES]
- Black Each Bodyblack Each Indicator Backgroundwhite Each Indicator Marking
- Contact Arrangement Truth Table [CTZT]
- Decimal, 1 Pole - 10 Positions Each Section
- Contact Load Current Rating [CTHF]
- 0.125 Amperes Resistive Load Dc At Sea Level
- Contact Voltage Rating In Volts [CQMK]
- 28.0 Dc At Sea Level
- Mounting Facility Pattern [CQYJ]
- Four Position Rectangular Single Mounting Facility
- Mounting Method [AXGY]
- Bracket Single Mounting Facility And Unthreaded Hole Single Mounting Facility
- Operating Temp Range [AFGA]
- -65.0/+85.0 Deg Celsius
- Style Designator [STYL]
- Rectangular Inline Indicating
- Individual Section Quantity [AFBH]
- 8
- Longest Vertical Distance Between Mounting Centers [AFDV]
- 0.900 Inches Nominal Single Mounting Facility
- Longest Horizontal Distance Between Mounting Centers [AFDS]
- 4.590 Inches Nominal Single Mounting Facility
- Readout Indicator Marking [CTZF]
- 0,1,2,3,4,5,6,7,8,9 Each Section
- Overall Height [ABKW]
- 1.546 Inches Nominal
- Overall Length [ABHP]
- 4.760 Inches Nominal
- Overall Width [ABMK]
- 1.150 Inches Maximum
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.100 Inches Nominal Single Mounting Facility
- Specification/Standard Data [ZZZK]
- 81349-Mil-S-22710/15 Government Specification
- Switch Actuator Indexing Position Quantity [CRJH]
- 10 All Actuators
- Terminal Type [CSCF]
- Printed Circuit
- Test Data Document [TEST]
- 81349-Mil-S-22710 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5930-01-361-6339
DLA Procurement Analysis 5930-01-361-6339
Management Data 5930-01-361-6339
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5930-01-361-6339
Freight Information 5930-01-361-6339
5930-01-361-6339 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061300. A Sub NMFC of X. It has a NMFC Description of CIRCUIT BREAKER/SWITCH NOI. 5930-01-361-6339 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34410 which rates the freight between FCL and LCL. 5930-01-361-6339 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5930-01-361-6339 is not classified as a special type of cargo when transported by water. 5930-01-361-6339 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5930-01-361-6339
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 7.0" H x 3.0" W x 3.0" L
- --
- --
- --
- Any Suitable Process
- 7.0" H x 3.0" W x 3.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 5930-01-361-6339 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: