Premium Information is available for this item - Upgrade for $1 a day
5930-01-357-5414
Code Indicating Wheel Switch
5930013575414 013575414 MIL-PRF-22710/18 M22710/18-1S14B MIL-S-22710/18
A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing. View more Code Indicating Wheel Switch
May 2023
2
Marketplace 5930-01-357-5414
Request a Quotation from participating marketplace vendors
Related Documents 5930-01-357-5414 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5930-01-357-5414 RQST NE Updated Every Day 5930-01-357-5414 RQST
Updated Every Day 5930-01-357-5414 RQST NE Related Documents 5930-01-357-5414 5+ Documents ( More...
Code Indicating Wheel Switch 5930013266811 M22710/18 M22710/18-054 MIL-S-22710/18 Code Indicating
https//www.nsnlookup.com /fsg-59/fsc-5930/us 5930-01-357-5414 Code Indicating Wheel Switch 5930013575414
M22710/18-1S11D MIL-S-22710/18 A switch which is externally actuated by a thumbwheel and/or pushbutton
Code Indicating Wheel Switch 5930013575414 M22710/18-1S14B MIL-S-22710/18 A switch which is externally
RQST M22710/18-1S11D MIL-S https//www.nsnlookup.com /fsg-59/fsc-5930/us 5930-01-357-5414 Code Indicating
Wheel Switch 5930013575414 M22710/18-1S14B MIL-S-22710/18 A switch which is externally actuated by a
Code Indicating Wheel Switch 5930013575414 Upgrade your Account Upgrade 5930-01-357-5414Code Indicating
Wheel Switch5930013575414 013575414 MIL-PRF-22710/18 externally actuated by a thumbwheel and/or pushbutton
Restrictions 5930-01-357-5414
5930-01-357-5414 is a Code Indicating Wheel Switch that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5930-01-357-5414
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5930-01-357-5414
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
Approved Sources 5930-01-357-5414
- Part Number
- Manufacturer
- Status
- M22710/18-1S14B
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-22710/18
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-S-22710/18
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5930-01-357-5414
- Characteristic
- Specifications
- FIIG
- Specifications
- A052B0
- Actuator Type [AYDW]
- Double Push Button Single Actuator
- Color [HUES]
- Black Single Body
- Contact Arrangement Truth Table [CTZT]
- Binary Code, 1 Pole - 12 Positions Single Section
- Contact Load Current Rating [CTHF]
- 125.0 Milliamperes Resistive Load Ac At Sea Level125.0 Milliamperes Resistive Load Dc At Sea Level
- Contact Voltage Rating In Volts [CQMK]
- 115.0 Ac At Sea Level28.0 Dc At Sea Level
- Distance Between Mounting Facility Centers [AEJN]
- 1.437 Inches Nominal Single Mounting Facility
- Mounting Facility Pattern [CQYJ]
- Two Position In-Line Single Mounting Facility
- Mounting Method [AXGY]
- Bracket Single Mounting Facility And Threaded Hole Single Mounting Facility
- Nominal Thread Size [CQJX]
- 0.086 Inches Single Mounting Facility
- Style Designator [STYL]
- Rectangular Indicating
- Individual Section Quantity [AFBH]
- 1
- Readout Indicator Marking [CTZF]
- 0,1,2,3,4,5,6,7,8,9,10,11 Single Section
- Overall Height [ABKW]
- 1.645 Inches Maximum
- Overall Length [ABHP]
- 0.410 Inches Maximum
- Overall Width [ABMK]
- 1.700 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 56 Single Mounting Facility
- Thread Series Designator [THSD]
- Unc Single Mounting Facility
- Specification/Standard Data [ZZZK]
- 81349-Mil-S-22710/18 Government Specification
- Switch Actuator Indexing Position Quantity [CRJH]
- 12 Single Actuator
- Terminal Type [CSCF]
- Printed Circuit
- Test Data Document [TEST]
- 81349-Mil-S-22710 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 2B Single Mounting Facility
DLA Procurement Analysis 5930-01-357-5414
Management Data 5930-01-357-5414
Similar Supply Items to 5930-01-357-5414
Freight Information 5930-01-357-5414
5930-01-357-5414 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061300. A Sub NMFC of X. It has a NMFC Description of CIRCUIT BREAKER/SWITCH NOI. 5930-01-357-5414 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34410 which rates the freight between FCL and LCL. 5930-01-357-5414 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5930-01-357-5414 is not classified as a special type of cargo when transported by water. 5930-01-357-5414 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5930-01-357-5414
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5930-01-357-5414 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: