5310-99-656-2290 5310996562290 996562290 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
6710-00-419-9604 6710004199604 004199604 is a photographic device used for taking silent and/or sound motion pictures. it consists of a light-tight chamber designed to produce a sequential series of pictures by means of a continuous or intermittent automatic film feed mechanism. this mechanism is so arranged, geared and timed that as the film for each frame is positioned, the light for each exposure is automatically controlled. it includes an electric or spring wound motor(s), taking lens(es), takeup reel or spool, and magazine(s). it may include a lens cover, carrying case, strap and/or handle. excludes cameras with sound recording equipment, film, tripod, or stand, accessory lighting equipment and external power supply. for cameras with sound recording equipment, see camera set,motion picture. for digital cameras, see camera system,digtal.
5355-99-256-9118 5355992569118 992569118 KNOB
5306-99-123-3196 5306991233196 991233196 is an externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is not designed to be held or driven with an inserted drivers. a locking feature may be incorporated in the design of the head or threads. for items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. for items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. excludes thumbscrew.
5935-01-211-1550 5935012111550 012111550 is an electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.