Premium Information is available for this item - Upgrade for $1 a day
5930-01-097-4428
Code Indicating Wheel Switch
5930010974428 010974428 MIL-PRF-22710/18 2808B-A1BSP M22710/18-1S3B MIL-DTL-22710/18
A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing. View more Code Indicating Wheel Switch
November 2023
7
Marketplace 5930-01-097-4428
Request a Quotation from participating marketplace vendors
Related Documents 5930-01-097-4428 5+ Documents (More...)
United States (US) 4. 5930-01-097-4428 Marketplace Restrictions Approved Sources Datasheet Management
RQST NE Updated Every Day 5930-01-097-4428 RQST Updated Every Day 5930-01-097-4428 RQST NE Related Documents
Upgrade your Account Upgrade 5930-01-281-3982Code Indicating Wheel Switch5930012813982 012813982 MIL-PRF-22710/18
switch which is externally actuated by a thumbwheel https//www.nsnlookup.com /fsg-59/fsc-5930/us 5930-01-097-4428
1S11DMIL-S-22710/18 A switch which is externally https//www.nsnlookup.com /fsg-59/fsc-5930/us 5930-01-097-4428
Code Indicating Wheel Switch 5930010974428 Upgrade your Account Upgrade 5930-01-097-4428Code Indicating
Upgrade your Account Upgrade 5930-01-295-6462Code Indicating Wheel Switch5930012956462 012956462 MIL-PRF-22710/18
NumberManufacturerStatusM22710/18-1S1C 81349 - Military Specifications (Active) Definitive Standard RNCC 2 RNVC 2 DAC 4 MIL-PRF-22710/18
Upgrade your Account Upgrade 5930-01-357-5414Code Indicating Wheel Switch5930013575414 013575414 MIL-PRF-22710/18
NumberManufacturerStatusM22710/18-1S3D 81349 - Military Specifications (Active) Definitive Standard RNCC 2 RNVC 2 DAC E MIL-PRF-22710/18
Restrictions 5930-01-097-4428
5930-01-097-4428 is a Code Indicating Wheel Switch that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 5930-01-097-4428
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5930-01-097-4428
- US Army (A918)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- A196
- Supplementary Receivers:
- CLCT
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- N9ND
- Spain (YB01)
- Effective Date:
- 1 Sep 2008
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5930-01-097-4428
- Part Number
- Manufacturer
- Status
- M22710/18-1S3B
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-22710/18
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-DTL-22710/18
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 2808B-A1BSP
- 91812 - Janco Corporation (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5930-01-097-4428
- Characteristic
- Specifications
- FIIG
- Specifications
- A052B0
- Actuator Type [AYDW]
- Push Button All Actuators
- Color [HUES]
- Black Single Indicator Background
- Color [HUES]
- White Single Indicator Marking
- Contact Arrangement Truth Table [CTZT]
- Bcd, 1 Pole - 8 Positions Single Section
- Contact Load Current Rating [CTHF]
- 125.0 Milliamperes Resistive Load Dc At Sea Level
- Contact Load Current Rating [CTHF]
- 125.0 Milliamperes Resistive Load Ac At Sea Level
- Contact Voltage Rating In Volts [CQMK]
- 115.0 Ac At Sea Level
- Contact Voltage Rating In Volts [CQMK]
- 28.0 Dc At Sea Level
- Distance Between Mounting Facility Centers [AEJN]
- 1.437 Inches Nominal Single Mounting Facility
- Hazardous Locations/Environmental Protection [ABFE]
- Dustproof And Explosion Proof
- Mounting Facility Pattern [CQYJ]
- Two Position In-Line Single Mounting Facility
- Mounting Method [AXGY]
- Flange Single Mounting Facility And Threaded Hole Single Mounting Facility
- Nominal Thread Size [CQJX]
- 0.086 Inches Single Mounting Facility
- Operating Temp Range [AFGA]
- -65.0/+125.0 Deg Celsius
- Style Designator [STYL]
- Rectangular Indicating
- Individual Section Quantity [AFBH]
- 1
- Readout Indicator Marking [CTZF]
- 0,1,2,3,4,5,6,7 Single Section
- Overall Height [ABKW]
- 1.695 Inches Maximum
- Overall Length [ABHP]
- 0.580 Inches Nominal
- Overall Width [ABMK]
- 1.687 Inches Nominal
- Special Features [FEAT]
- One Increase And One Decrease Pushbutton Panel Seal Gasket Provided
- Specification/Standard Data [ZZZK]
- 81349-Mil-S-22710/18 Government Specification
- Switch Actuator Indexing Position Quantity [CRJH]
- 8 All Actuators
- Terminal Type [CSCF]
- Printed Circuit
- Test Data Document [TEST]
- 81349-Mil-S-22710 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 2B Single Mounting Facility
- Thread Series Designator [THSD]
- Unc Single Mounting Facility
- Thread Quantity Per Inch [CMLP]
- 56 Single Mounting Facility
Weapon Systems (WSDC) 5930-01-097-4428
DLA Procurement Analysis 5930-01-097-4428
- Last Stock Position:
- 17 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5930-01-097-4428
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- SJ
- Surveillance Target Acquisition and Night Observation (STANO)
Air Defense Systems Support
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5930-01-097-4428
Freight Information 5930-01-097-4428
5930-01-097-4428 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061300. A Sub NMFC of X. It has a NMFC Description of CIRCUIT BREAKER/SWITCH NOI. 5930-01-097-4428 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34410 which rates the freight between FCL and LCL. 5930-01-097-4428 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5930-01-097-4428 is not classified as a special type of cargo when transported by water. 5930-01-097-4428 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5930-01-097-4428
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5930-01-097-4428 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: