5930-99-953-6961

capabilities of computers such as personal computers. https//www.nsnlookup.com /fsg-59/fsc-5930/uk 5930-99-953-6961
Thermostatic Switch 5930999536961 999536961 5930-99-953-6961 5930999536961 999536961 is a switch

| DAC: 2 25 Apr 1991 5330-99-970-9834 Gasket 84350837RNCC: 3 | RNVC: 2 | DAC: 2 25 Apr 1991 5930-99-953-6961

Apr 1991 5945-99-524-6338 Electromagnetic Relay 21744CRNCC: 5 | RNVC: 1 | DAC: 2 25 Apr 1991 5930-99-953-6961

3120-66-147-3881 3120661473881 661473881 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.

5306-21-868-8729 5306218688729 218688729 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.