5930-25-126-4873

Documents 5360-37-515-2049 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-59/fsc-5930/no 5930-25-126-4873
Tryckknapp 5930251264873 251264873,5152049 515-2049 6515015152049 015152049 WIRE,ORTHOPEDIC https

web browser . 5930-22-263-0858Tryckknapp5930222630858 222630858 Cancelled - Replaced by NSN 5930-25-126-4873

6515-01-515-2049 6515015152049 015152049 WIRE,ORTHOPEDIC

5841-00-515-2049 5841005152049 005152049 PANEL,LIGHTED,NAVIGATION

5310-14-515-2049 5310145152049 145152049 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.