5930-14-312-4298

1560-01-300-1028 1560013001028 013001028 CRANK ASSEMBLY

5935-14-300-1028 5935143001028 143001028

5365-12-300-1028 5365123001028 123001028 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

4520-37-300-1028 4520373001028 373001028

4520-00-300-1028 4520003001028 003001028 is an electrical device in the form of a resistor consisting of a resistance wire, an insulating material, and a sheath. it is designed to transform electrical current into heat while immersed in a liquid to be heated or in contact with materials to be melted. it may include an automatic control to regulate the amount of heat generated.