5930-14-221-3353

5365-01-155-5969 5365011555969 011555969 RING,SCRAPER

1560-12-155-5969 1560121555969 121555969 U-PROFIL

1355-15-155-5969 1355151555969 151555969 PARAELICHE PER SILU

1260-00-155-5969 1260001555969 001555969

5310-66-155-5969 5310661555969 661555969 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.