5930-14-208-4690

day Upgrade your Account Upgrade 2530-00-493-2105Shoe Type Brake2530004932105 004932105 FSH10-64 107432
Microcontacts Equip 5930142084690 142084690 $1 a day Upgrade your Account Upgrade 5930-14-208-4690Microcontacts
Equip5930142084690 142084690 107432 https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305-00-117-5975 Setscrew

Upgrade for $1 a day Upgrade your Account Upgrade 5305-00-117-5975Setscrew5305001175975 001175975 107432
Documents 5305-00-117-5975 1+ Documents (More... ) https//www.nsnlookup.com /fsg-59/fsc-5930/fr 5930-14-208-4690
Microcontacts Equip 5930142084690 142084690 $1 a day Upgrade your Account Upgrade 5930-14-208-4690Microcontacts

4330-12-197-9372 4330121979372 121979372 is a component of a filter, fluid designed to contain the filter element, fluid and attach to the head, fluid filter or the cover, access. it may have inlet and/or outlet connections, means for mounting a drain plug(s), check, relief and or by-pass valves. excludes bowl, sediment.see also strainer body, sediment.

6145-25-101-4990 6145251014990 251014990 is two or more insulated conductors (solid or stranded) contained in a common covering, or two or more insulated conductors twisted or molded together without a common covering, or one insulated conductor with a metallic covering, covering, shield, or outer conductor. the rated working voltage of the item must be 300 volts or more, or in lieu of this the test voltage must be 1,000 volts or more; and the size of each individual conductor must be number 18 american wire gage (0.75 square millimeters) or larger. for cables with uninsulated neutral conductor use the hightest rated voltage. refers to bulk quantities only, for items of definite length with processed ends or terminated in fittings, see cable assembly, power, electrical. for low voltage aircraft and automotive cable, see cable, special purpose, electrical.

5310-01-551-7783 5310015517783 015517783 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.