5930-22-125-4278

: 4 14 Aug 2004 5330-22-619-7528 Rubber Strip 56515840RNCC: 3 | RNVC: 2 | DAC: 4 25 Sep 2009 5930-22-125-4278

4730-22-620-0208 4730226200208 226200208 is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. it may have side or heel inlet(s). see also elbow, pipe and connector, multiple, fluid pressure line.

9905-00-620-0208 9905006200208 006200208

6115-99-620-0208 6115996200208 996200208

5310-21-620-0208 5310216200208 216200208 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.