5930-12-347-2840

5910-00-624-0138 5910006240138 006240138 is a capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. it may be a single unit or consist of two or more fixed units which cannot be seperated. for items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see capacitor, fixed, plastic dielectric. for items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see capacitor, fixed, metalized, paper-plastic dielectric.

6625-01-624-0138 6625016240138 016240138 is a device for data input by key depression which causes the generation of the selected character, numeral or the like.

5961-25-124-1659 5961251241659 251241659 LIKERETTER,HALVLEDE

5945-15-124-1659 5945151241659 151241659 CONTATTORE MAGNETIC

5310-17-124-1659 5310171241659 171241659 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.