5930-21-879-1780

CAGE 2M284 Ld And G Toolcraft Inc in Baltimore, MD United States

CAGE 0M284 Ven-Ox Contractors Inc in Ojai, CA United States

5310-01-462-2758 5310014622758 014622758 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5999-01-349-6800 5999013496800 013496800 is a shaped metallic item designed to increase the effectiveness of radio frequency/electromagnetic interference, or a nonmetallic item containing a wire mesh, metal, or other electrically conductive particles designed to provide environmental sealing and radio frequency/electromagnetic interference shielding. for bulk items see wire mesh, knitted or gasketing material, conductive.

4130-01-335-9355 4130013359355 013359355 is an assembly consisting of a compressor, condenser, drive, driving component and pertinent controls, which has the function of converting low pressure vapor into high pressure liquid.