5920-12-388-6877

9520-50-000-2011 9520500002011 500002011 is a structural shape fabricated from a ferrous or nonferrous material and resembling the letter l in cross-sectional form. the edges may have a bulb, be rounded, and the inside corner may have a fillet.

9520-50-000-2010 9520500002010 500002010 is a structural shape fabricated from a ferrous or nonferrous material and resembling the letter l in cross-sectional form. the edges may have a bulb, be rounded, and the inside corner may have a fillet.

9520-50-000-9194 9520500009194 500009194 is a structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: for the letter h, both flanges of the h section are equal or longer than the width measured along the axis of the web; for the letter i, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters t and z, on nonferrous type, the web is usually at right angles to the flanges. letter h section may have a maximum of 5 percent slope on the inside face of the flanges.

9520-50-001-1046 9520500011046 500011046 is a structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: for the letter h, both flanges of the h section are equal or longer than the width measured along the axis of the web; for the letter i, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters t and z, on nonferrous type, the web is usually at right angles to the flanges. letter h section may have a maximum of 5 percent slope on the inside face of the flanges.

9520-50-000-9175 9520500009175 500009175 is a structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: for the letter h, both flanges of the h section are equal or longer than the width measured along the axis of the web; for the letter i, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters t and z, on nonferrous type, the web is usually at right angles to the flanges. letter h section may have a maximum of 5 percent slope on the inside face of the flanges.