5920-12-362-3870

-12-325-0852 Electrical Surge Arrester Assembly 902284RNCC: 5 | RNVC: 9 | DAC: 3 30 Apr 1991 5920-12-362-3870

Upgrade your Account Upgrade 4730-00-858-3492Tube Fitting Brazing Ferrule4730008583492 008583492 900605
-4S 104331-001 900605-4 A flanged cylindrical metallic item designed to be slipped over tubing and brazed
27.26"; 37 Degree Flared Styll Nut, P/N 1290-4S, Nsn 4730-00-314-8366;37 Degree Flared Sleeve, P/N 900605

4710-14-362-2814 4710143622814 143622814 is a length of tubing, straight, or prebent to a predetermined angle, with added component(s) that forms an end connection on one or both ends. for flexible tube assemblies, see hose assembly (as modified). for items having perforations in the tubing or attachments, see tube assembly, fire extinguishing system. excludes items having integral preformed or plain ends, tube, bent (as modified), and items which are branched or forked.

5940-21-878-7224 5940218787224 218787224 is an item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. it is usually used for junctions or terminations of wire or cable assemblies. it does not include items as defined above with parts, such as resistors and capacitors mounted thereon. do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). excludes terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. for items having printed electrical conductor paths, see printed wiring board.

4730-12-320-0520 4730123200520 123200520 is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. it is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.