5920-12-150-3615

5920-12-198-3588 Fuseholder Subassembly HL-771 051-1/31RNCC: 5 | RNVC: 9 | DAC: 9 19 Jan 1984 5920-12-150-3615

5310-17-110-1602 5310171101602 171101602 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

7640-23-110-1602 7640231101602 231101602 is a sheet or plate representing on a plain surface all or part of earth's surface, showing physical, natural, statistical and/or political features, or division. excludes chart; chart, recording instrument; plate, instruction; and sheet, technical.

5985-99-110-1602 5985991101602 991101602

5962-01-110-1602 5962011101602 011101602 MICROCIRCUIT,DIGITAL