Premium Information is available for this item - Upgrade for $1 a day
5915-01-350-3695
Radio Frequency Interference Filter
5915013503695 013503695 MIL-PRF-28861/2 600JX2613B M28861/02-011TB MIL-F-28861/2
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE. View more Radio Frequency Interference Filter
November 2023
6
Marketplace 5915-01-350-3695
Request a Quotation from participating marketplace vendors
Related Documents 5915-01-350-3695 5+ Documents (More...)
United States (US) 4. 5915-01-350-3695 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 5915-01-350-3695 RQST NE Related Documents 5915-01-350-3695 5+
An item designed to suppress undesired (interfering) frequencies An M28861/02-015TB MIL-F-28861/2
Interference Filter 600JX2613B M28861/02-011TB MIL-F-28861/2 An item designed to suppress undesired
Radio Frequency Interference Filter 600JX2613B M28861/02-011TB MIL-F-28861/2 An item designed to
MIL-PRF-28861/2 Every Day 5915-01-321-8119 RQST Updated Every Day 5915-01-321-8119 RQST NE Related
Radio Frequency Interference Filter 600JX2613B M28861/02-011TB MIL-F-28861/2 An item designed to
An item designed to suppress undesired (interfering) frequencies An M28861/02-015TB MIL-F-28861/2
An item designed An item designed to suppress undesired (interfering) frequencies MIL-F-28861/2 An
Filter your Account Upgrade 5915-01-350-3695Radio Frequency Interference Filter5915013503695 013503695
Restrictions 5915-01-350-3695
5915-01-350-3695 is a Radio Frequency Interference Filter that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is a US Munitions List or Commerce Control List Item which must be destroyed to prevent restoration or repair. Only authorized parties may possess this item. This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5915-01-350-3695
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5915-01-350-3695
- US Army (A918)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- A196
- US Navy (N9BN)
- Effective Date:
- 1 Jun 2006
- Supplementary Collaborators:
- GTJBHD
Approved Sources 5915-01-350-3695
- Part Number
- Manufacturer
- Status
- M28861/02-011TB
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-28861/2
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 600JX2613B
- 56289 - Sprague Electric Co World Hqs (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MIL-F-28861/2
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5915-01-350-3695
- Characteristic
- Specifications
- FIIG
- Specifications
- A047B0
- Body Outside Diameter [ADAR]
- 0.410 Inches Maximum
- Body Material [CQRG]
- Metal
- Body Surface Treatment [CRST]
- Tin
- Features Provided [CBBL]
- Nut And Washer
- Functional Terminal Type And Quantity [CQDW]
- 1 Tab, Solder Lug Input 1St Function1 Tab, Solder Lug Output 2Nd Function
- Maximum Dielectric Withstanding Dc Voltage [CRDC]
- 200.0 Volts At Sea Level
- Maximum Voltage Drop Per Function [AHBE]
- 0.075 Volts Dc Blank
- Maximum Temp Rise [AHCG]
- 25.0 Deg Celsius
- Mounting Facility Screw Thread Series Designator [AKEJ]
- Unf
- Mounting Facility Type And Quantity [AXHR]
- 1 Threaded Stud
- Nominal Thread Size [CQJX]
- 0.250 Inches
- Operating Current Rating Per Function In Amps [AHBC]
- 5.0 Blank
- Operating Temp Range [AFGA]
- -55.0/+125.0 Deg Celsius
- Operating Voltage Rating And Type Per Function [CQGC]
- 100.0 Volts Dc Blank
- Inclosure Type [AKNA]
- Hermetically Sealed
- Load Impedance Per Function [AHAS]
- 50.0 Ohms Blank
- Principal Circuitry Type Per Function [AHBL]
- Inductance-Capacitance Blank
- Source Impedance Rating Per Function [AHAQ]
- 50.0 Ohms Blank
- Overall Length [ABHP]
- 1.125 Inches Nominal
- Unpackaged Unit Weight [PKWT]
- 10.0 Grams
- Vibration Resistance Range In Hertz [AECR]
- +10.0/+500.0
- Specification/Standard Data [ZZZK]
- 81349-Mil-F-28861/2 Government Specification
- Style Designator [STYL]
- Round Terminal/Terminals On Opposite Surfaces
- Test Data Document [TEST]
- 81349-Mil-F-28861 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5915-01-350-3695
DLA Procurement Analysis 5915-01-350-3695
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5915-01-350-3695
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5915-01-350-3695
Freight Information 5915-01-350-3695
5915-01-350-3695 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061990. A Sub NMFC of X. It has a NMFC Description of ELECTRICAL EQUIP:FILTERS. 5915-01-350-3695 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58500 which rates the freight between FCL and LCL. 5915-01-350-3695 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5915-01-350-3695 is not classified as a special type of cargo when transported by water. 5915-01-350-3695 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5915-01-350-3695
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-DTL-17667, Neutral Wrapping Paper
- No Requirement
- Not Applicable
- --
- No special marking
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5915-01-350-3695 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: