Premium Information is available for this item - Upgrade for $1 a day
5915-01-046-3387
Radio Frequency Interference Filter
5915010463387 010463387 MIL-PRF-15733/23 FL10YW1ED3 M15733/23-0051 MILF15733-23
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE. View more Radio Frequency Interference Filter
June 2023
13
Marketplace 5915-01-046-3387
Request a Quotation from participating marketplace vendors
Related Documents 5915-01-046-3387 5+ Documents (More...)
Radio Frequency Interference Filter FL10YW1ED3 M15733/23-0051 MILF15733-23 An item designed to
NS Request Quotation 241-0693-020 FILTER,RADIO FREQUENCY INTERFERENCE 1 EA NS Request Quotation FL10YW1ED3
Radio Frequency Interference Filter 3387Radio Frequency Interference Filter5915010463387 010463387
MIL-PRF-15733/23 FL10YW1ED3 M15733/23-0051 M15733-23-0051 FILTER,RADIO FREQUENCY INTERFERENCE 34 EA
Navy (DN)NZDiscontinued-Use 5915-01-046-3387Defense Logistics Agency (DS)IZDiscontinued-Use 5915-01-046-3387
M15733-23-0054M MILF15733-23 Frequency Interference Filter5915010239820 010239820 MIL-PRF-15733/23
FL10CW1ED3 M15733/23-0031 MILF15733-23 https//www.nsnlookup.com /fsg-59/fsc-5915/us 010200394 MIL-PRF
NS Request Quotation 241-0693-020 FILTER,RADIO FREQUENCY INTERFERENCE 1 EA NS Request Quotation FL10YW1ED3
M15733-23-0054M MILF15733-23 An item designed to suppress undesired (interfering) frequencies and
Restrictions 5915-01-046-3387
5915-01-046-3387 is a Radio Frequency Interference Filter that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is a US Munitions List or Commerce Control List Item which must be destroyed to prevent restoration or repair. Only authorized parties may possess this item. This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 5915-01-046-3387
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5915-01-046-3387
- US Air Force (FXGX)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Jun 2006
- Supplementary Collaborators:
- GTHD
Approved Sources 5915-01-046-3387
- Part Number
- Manufacturer
- Status
- M15733/23-0051
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-15733/23
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- FL10YW1ED3
- 81349 - Military Specifications (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MILF15733-23
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5915-01-046-3387
- Characteristic
- Specifications
- FIIG
- Specifications
- A047B0
- Body Length [ADAQ]
- 0.510 Inches Nominal
- Body Outside Diameter [ADAR]
- 0.416 Inches Maximum
- Body Material [CQRG]
- Metal
- Functional Terminal Type And Quantity [CQDW]
- 1 Tab, Solder Lug Input 1St Function
- Functional Terminal Type And Quantity [CQDW]
- 1 Tab, Solder Lug Output 2Nd Function
- Maximum Dielectric Withstanding Dc Voltage [CRDC]
- 125.0 Volts At Sea Level
- Maximum Voltage Drop Per Function [AHBE]
- 140.0 Millivolts Dc Blank
- Maximum Temp Rise [AHCG]
- 25.0 Deg Celsius
- Mounting Facility Screw Thread Series Designator [AKEJ]
- Unf
- Mounting Facility Type And Quantity [AXHR]
- 1 Threaded Bushing
- Nominal Thread Size [CQJX]
- 0.250 Inches
- Operating Current Rating Per Function In Amps [AHBC]
- 2.0 Blank
- Operating Temp Range [AFGA]
- -55.0/+125.0 Deg Celsius
- Operating Voltage Rating And Type Per Function [CQGC]
- 50.0 Volts Dc Blank
- Inclosure Type [AKNA]
- Hermetically Sealed
- Load Impedance Per Function [AHAS]
- 50.0 Ohms Blank
- Principal Circuitry Type Per Function [AHBL]
- Capacitance-Inductance Blank
- Source Impedance Rating Per Function [AHAQ]
- 50.0 Ohms Blank
- Overall Length [ABHP]
- 1.072 Inches Nominal
- Vibration Resistance Range In Hertz [AECR]
- +10.0/+2000.0
- Specification/Standard Data [ZZZK]
- 81349-Mil-F-15733/23 Government Specification
- Style Designator [STYL]
- Round Terminal/Terminals On Opposite Surfaces
- Test Data Document [TEST]
- 81349-Mil-F-15733 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5915-01-046-3387
DLA Procurement Analysis 5915-01-046-3387
Management Data 5915-01-046-3387
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5915-01-046-3387
Freight Information 5915-01-046-3387
5915-01-046-3387 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061990. A Sub NMFC of X. It has a NMFC Description of ELECTRICAL EQUIP:FILTERS. 5915-01-046-3387 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58500 which rates the freight between FCL and LCL. 5915-01-046-3387 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5915-01-046-3387 is not classified as a special type of cargo when transported by water. 5915-01-046-3387 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5915-01-046-3387
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5915-01-046-3387 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: