Premium Information is available for this item - Upgrade for $1 a day
5915-01-027-9511
Radio Frequency Interference Filter
5915010279511 010279511 MIL-PRF-28861/3 FL11AW1ED3 MS733/23-0012 M28861/03-003TB M15733/23-0012 FL11AW1ED3-0012 MIL-PRF-28861/03 MILF15733-23
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE. View more Radio Frequency Interference Filter
November 2023
9
Marketplace 5915-01-027-9511
Request a Quotation from participating marketplace vendors
Related Documents 5915-01-027-9511 5+ Documents (More...)
your Account Upgrade 5915-01-027-9511Radio Frequency Interference Filter5915010279511 010279511
Standard RNCC 2 RNVC 2 DAC E MIL-PRF-28861/3 https//www.nsnlookup.com /fsg-59/fsc-5915/us 5915-01-400
Documents 5915-01-400-3020 1+ Documents (More... ) https//www.nsnlookup.com /fsg-59/fsc-5915/us 5915-01-027-9511
Interference Filter your Account Upgrade 5915-01-027-9511Radio Frequency Interference Filter5915010279511 010279511
Documents 5915-01-400-3567 1+ Documents (More... ) https//www.nsnlookup.com /fsg-59/fsc-5915/us 5915-01-027-9511
Interference Filter your Account Upgrade 5915-01-027-9511Radio Frequency Interference Filter5915010279511 010279511
Radio Frequency Interference Filter MILF15733-23 Frequency Interference Filter5915010239820 010239820
MIL-PRF-15733/23 FL10CW1ED3 M15733/23-0031 MILF15733-23 Frequency Interference Filter5915010239820 010239820
Radio Frequency Interference Filter 010200394 MIL-PRF-15733/23 M15733-23-0054M MILF15733-23 Frequency
Interference Filter5915010239820 010239820 MIL-PRF-15733/23 FL10CW1ED3 M15733/23-0031 MILF15733-23 https
Restrictions 5915-01-027-9511
5915-01-027-9511 is a Radio Frequency Interference Filter that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is a US Munitions List or Commerce Control List Item which must be destroyed to prevent restoration or repair. Only authorized parties may possess this item. This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 5915-01-027-9511
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5915-01-027-9511
- US Army (A918)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- A196
- Supplementary Receivers:
- CL
- US Air Force (FXGX)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- FXTX
- US Marine Corps (MC49)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- MC13
- US Navy (N9BN)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HDKE
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5915-01-027-9511
- Part Number
- Manufacturer
- Status
- M28861/03-003TB
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-28861/3
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- FL11AW1ED3
- 81349 - Military Specifications (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- M15733/23-0012
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- FL11AW1ED3-0012
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MIL-PRF-28861/03
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MILF15733-23
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MS733/23-0012
- 96906 - Military Standards (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5915-01-027-9511
- Characteristic
- Specifications
- FIIG
- Specifications
- A047B0
- Body Length [ADAQ]
- 0.737 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.302 Inches Minimum And 0.322 Inches Maximum
- Body Material [CQRG]
- Metal
- Functional Terminal Type And Quantity [CQDW]
- 1 Tab, Solder Lug Input 1St Function
- Functional Terminal Type And Quantity [CQDW]
- 1 Tab, Solder Lug Output 2Nd Function
- Maximum Voltage Drop Per Function [AHBE]
- 170.0 Millivolts Dc Blank
- Maximum Temp Rise [AHCG]
- 25.0 Deg Celsius
- Mounting Facility Screw Thread Series Designator [AKEJ]
- Unf
- Mounting Facility Type And Quantity [AXHR]
- 2 Threaded Bushing
- Nominal Thread Size [CQJX]
- 0.250 Inches
- Operating Current Rating Per Function In Amps [AHBC]
- 0.1 Blank
- Operating Temp Range [AFGA]
- -55.0/+125.0 Deg Celsius
- Operating Voltage Rating And Type Per Function [CQGC]
- 150.0 Volts Dc Blank
- Inclosure Type [AKNA]
- Hermetically Sealed
- Load Impedance Per Function [AHAS]
- 50.0 Ohms Blank
- Source Impedance Rating Per Function [AHAQ]
- 50.0 Ohms Blank
- Overall Length [ABHP]
- 1.117 Inches Maximum
- Vibration Resistance Range In Hertz [AECR]
- +10.0/+2000.0
- Specification/Standard Data [ZZZK]
- 81349-Mil-F-15733/23 Government Specification
- Style Designator [STYL]
- Round Terminal/Terminals On Opposite Surfaces
- Test Data Document [TEST]
- 81349-Mil-F-15733 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5915-01-027-9511
DLA Procurement Analysis 5915-01-027-9511
- Last Stock Position:
- 12 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5915-01-027-9511
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5915-01-027-9511
Freight Information 5915-01-027-9511
5915-01-027-9511 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061990. A Sub NMFC of X. It has a NMFC Description of ELECTRICAL EQUIP:FILTERS. 5915-01-027-9511 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58500 which rates the freight between FCL and LCL. 5915-01-027-9511 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5915-01-027-9511 is not classified as a special type of cargo when transported by water. 5915-01-027-9511 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5915-01-027-9511
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-DTL-17667, Neutral Wrapping Paper
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566 or PPP-B-676, Folding or Setup Box
Contracting Technical Data File (CTDF) 5915-01-027-9511 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: