5915-00-865-6044

5306-00-168-3066 5306001683066 001683066 is an externally threaded fastener whose threaded portion is of one nominal diameter. it has a series of longitudinal ribs, splines or serrations on all or a part of the shoulder. the minor diameter of the ribs must be greater than the major diameter of the threads. see also bolt, ribbed neck.

Jan 1962 5915-00-865-6048 Hybrid Circuit Network 1683070RNCC: 3 | RNVC: 1 | DAC: X 1 Jan 1962 5915-00-865-6044

4710-12-168-3066 4710121683066 121683066 is a bent hollow item, welded or seamless. it has a round, square or any other cross section, with a continuous periphery. it is primarily designed to convey fluids, gases and/or semisolids. excludes items of circular cross section which conform in dimensional characteristics to pipe, metallic; elbow, pipe; elbow, tube; bend, electrical conduit; bend, pipe, return; and bend, tube, return. for items with end fittings on one or both ends, see tube assembly, metal.

7025-15-168-3066 7025151683066 151683066 VIDEO MONOCROMATICO

5306-01-168-3066 5306011683066 011683066 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.