5915-12-326-2242

RNVC: 2 | DAC: 33670-0RNCC: 5 | RNVC: 2 | DAC: 312375-9994RNCC: 5 | RNVC: 9 | DAC: 9 9 Jul 2012 5915-12-326-2242

: 9 24 Aug 2005 5915-12-170-3455 Band Pass Filter FZ271RNCC: 5 | RNVC: 2 | DAC: 3 8 Jul 1977 5915-12-326-2242

5365-12-173-0720 5365121730720 121730720 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5995-01-696-2878 5995016962878 016962878 is a definite length of cable, radio frequency having one or both ends processed and/or terminated in fittings which provide for connection to other items. includes multiple cable assemblies in a common jacket or shield. excludes items having branches or forks and lead, test. see also cable assembly, radio frequency, branched.

5310-17-101-6020 5310171016020 171016020 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.