5910-01-266-7562

5306-99-120-9928 5306991209928 991209928 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.

5331-16-005-3671 5331160053671 160053671 is a nonmetallic circular item with an aperature, having a solid round cross-section. they are used primarily for sealing. for items with other than round cross section, see packing,preformed. for noncircular items with a round cross-section, see seal,nonmetallic round section and rubber,round section.

enable JavaScript in your web browser . 2530-66-010-7917Steering Arm Pin2530660107917 660107917 TSE(V)102-44
66-010-7917 New Zealand (ZE) Approved Sources 2530-66-010-7917 Part NumberManufacturerStatusTSE(V)102-44

9505-14-345-6759 9505143456759 143456759 is a ferrous or nonferrous wire having a solid cross section that is square or rectangular with sharp or rounded corners or edges, or is round, half-round, hexagonal, or octagonal and whose diameter, width, or greatest distance between parallel faces is less than 3/8 inch or 10.0mm. the rectangular shape is limited to a thickness less than 3/32 inch or 2.5mm and a width of 1 1/4 inch or 30.0mm or less. for dimensions greater than above, see bar, metal. excludes items having electrical resistivity or conductivity ratings.

1240-25-138-2368 1240251382368 251382368 HAANDRATT