Premium Information is available for this item - Upgrade for $1 a day
5910-01-111-7194
Plastic Dielectric Fixed Capacitor
5910011117194 011117194 MIL-PRF-19978/13 CQR29A1ME224J3P CQ09A1ME224J3 MI9978-1-213J MILC19978-1 CQ09A1ME224K3 CQR29A1ME224K3M CQR29A1ME224J3M MILC19978-13
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC. View more Plastic Dielectric Fixed Capacitor
January 2024
26
Marketplace 5910-01-111-7194
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5910-01-111-7194 5+ Documents (More...)
CQR29A1ME224J3M MILC19978-13 A capacitor whose capacitance value cannot be adjusted or varied, having
MILC19978-1 CAPACITOR,FIXED,PLASTIC DIELECTRIC 12 EA NS Request Quotation MILC19978-13 CAPACITOR,FIXED
CQ09A1ME224J3 CAPACITOR,FIXED,PLASTIC DIELECTRIC 30 EA NS Request Quotation Subscribe to View Vendor
Plastic Dielectric Fixed Capacitor 011117194 MI9978-1-213JMILC19978-1 CQ09A1ME224K3 CQR29A1ME224K3M
CQ09A1ME224K3 CAPACITOR,FIXED,PLASTIC DIELECTRIC 83 EA NS Request Quotation Subscribe to View Vendor
MILC19978-1 CAPACITOR,FIXED,PLASTIC DIELECTRIC 12 EA NS Request Quotation Subscribe to View Vendor Details
MILC19978-1 CAPACITOR,FIXED,PLASTIC DIELECTRIC 12 EA NS Request Quotation MILC19978-13 CAPACITOR,FIXED
Request Quotation MILC19978-1 CAPACITOR,FIXED MILC19978-13 A capacitor whose capacitance MILC19978 https
MILC19978-1 CAPACITOR,FIXED,PLASTIC DIELECTRIC 12 EA NS Request Quotation MILC19978-13 CAPACITOR,FIXED
43 EA NS Request Quotation MILC19978-1 CAPACITOR,FIXED MILC19978-1 CAPACITOR,FIXED CQ09A1MC122J3 MILC19978
Restrictions 5910-01-111-7194
5910-01-111-7194 is a Plastic Dielectric Fixed Capacitor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5910-01-111-7194
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5910-01-111-7194
- US Army (A918)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- A196
- US Air Force (FXGX)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HD
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- United Kingdom (ZK01)
- Effective Date:
- 1 Jul 2004
- Italy (ZR01)
- Effective Date:
- 1 Dec 2007
Approved Sources 5910-01-111-7194
- Part Number
- Manufacturer
- Status
- CQR29A1ME224J3P
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-19978/13
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- CQR29A1ME224K3M
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- CQR29A1ME224J3M
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MILC19978-13
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- CQ09A1ME224J3
- 81349 - Military Specifications (Active)
- Transferred
- Transferred
- MI9978-1-213J
- 81349 - Military Specifications (Active)
- Transferred
- Transferred
- MILC19978-1
- 81349 - Military Specifications (Active)
- Transferred
- Transferred
- CQ09A1ME224K3
- 81349 - Military Specifications (Active)
- Transferred
- Transferred
Datasheet 5910-01-111-7194
- Characteristic
- Specifications
- FIIG
- Specifications
- A010B0
- Body Diameter [ABPM]
- 0.624 Inches Maximum
- Body Length [ADAQ]
- 1.593 Inches Nominal
- Body Style [AAQL]
- W/O Mtg Facilities, Axial Terminals
- Capacitance Value Per Section [CQBQ]
- 0.220 Microfarads Single Section
- Case Insulation Material [CWSZ]
- Plastic
- Case Material [CWJK]
- Metal
- Dielectric Material [CWSS]
- Plastic Polyethylene Terephthalate
- Dissipation Factor At Reference Temp In Percent [CWPM]
- 0.6000
- Features Provided [CBBL]
- Hermetically Sealed Case
- Nonderated Continuous Voltage Rating And Type Per Section [CQWM]
- 400.0 Dc Single Section
- Nonderated Operating Temp [CQJJ]
- -65.0 Deg Celsius Minimum And 85.0 Deg Celsius Maximum
- Insulation Resistance At Maximum Operating Temp [CQBF]
- 5000.0 Megohm-Microfarads
- Insulation Resistance At Reference Temp [CWPK]
- 100000.0 Megohms
- Internal Electrical Connection Type [AFHW]
- Extended Foil
- Reliability Indicator [AARG]
- Established
- Reliability Failure Rate Level In Percent [AARH]
- 0.1000
- Schematic Diagram Designator [AEBZ]
- No Common Or Grounded Electrode(S)
- Tolerance Range Per Section [CRTP]
- -5.00/+5.00 Percent Single Section
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-19978/13 Government Specification
- Terminal Diameter [AEBT]
- 0.032 Inches Nominal
- Terminal Length [ABJT]
- 1.625 Inches Minimum
- Terminal Surface Treatment [CWSG]
- Solder
- Terminal Type And Quantity [TTQY]
- 2 Uninsulated Wire Lead
- Test Data Document [TEST]
- 81349-Mil-C-19978 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5910-01-111-7194
DLA Procurement Analysis 5910-01-111-7194
Management Data 5910-01-111-7194
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5910-01-111-7194
Freight Information 5910-01-111-7194
5910-01-111-7194 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061400. A Sub NMFC of X. It has a NMFC Description of CONDENSERS/PARTS NOI/CAPACITORS. 5910-01-111-7194 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34450 which rates the freight between FCL and LCL. 5910-01-111-7194 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5910-01-111-7194 is not classified as a special type of cargo when transported by water. 5910-01-111-7194 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5910-01-111-7194
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5910-01-111-7194 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: