Premium Information is available for this item - Upgrade for $1 a day
5910-01-018-2261
Plastic Dielectric Fixed Capacitor
5910010182261 010182261 MIL-PRF-55514/1 CFR02AMC472JM 933-1042-200 250D1C472J 61F10AC472 CFR02AMC472KM MILC55514-1
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC. View more Plastic Dielectric Fixed Capacitor
November 2023
13
Marketplace 5910-01-018-2261
Request a Quotation from participating marketplace vendors
Related Documents 5910-01-018-2261 5+ Documents (More...)
(Identification) 1/2 NSN 5910-01-018-2261 (Identification) 2/2 - - 1.
RQST NE Updated Every Day 5910-01-018-2261 RQST Updated Every Day 5910-01-018-2261 RQST NE Related
CFR02AQC102GM CFR02AMC102GM MILC55514-1 A capacitor whose capacitance value cannot be adjusted
663UW1.0MFDP0RM10PCT200V CFR02AMC105JM 663UW10502W 0160-0492 663UW10592W MILC55514-1 A capacitor
Plastic Dielectric Fixed Capacitor 010182261 CFR02AMC472JM 933-1042-200 250D1C472J 61F10AC472 CFR02AMC472KM
MILC55514-1 A capacitor whose A capacitor whose capacitance value cannot CFR02AQC102GM CFR02AMC102GM
663UW10502W 0160-0492 663UW10592W MILC55514-1 A capacitor whose capacitance value cannot be adjusted
663UW1.0MFDP0RM10PCT200V CFR02AMC105JM 663UW10502W0160-0492 663UW10592W MILC55514-1 capacitor
CFR02AMC224GM CFR02AMC224JM MILC55514-1 A capacitor whose capacitance value cannot be adjusted
CFR02AMB223KP CFR02AMB223GM MILC55514-1 A capacitor whose capacitance value cannot be adjusted
Restrictions 5910-01-018-2261
5910-01-018-2261 is a Plastic Dielectric Fixed Capacitor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 5910-01-018-2261
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5910-01-018-2261
- US Army (A918)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- A196
- Supplementary Receivers:
- BD
- US Air Force (FXGX)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTKEHSHD
- France (ZF01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5910-01-018-2261
- Part Number
- Manufacturer
- Status
- CFR02AMC472JM
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-55514/1
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- CFR02AMC472KM
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MILC55514-1
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- CFR02AMC472KM
- 14655 - Cornell-Dubilier Electronics (Replaced)
- Advisory Reference
- Advisory Reference
- 933-1042-200
- 13499 - Rockwell Collins, Inc. (Active)
- Transferred
- Transferred
- 250D1C472J
- 14752 - Electrocube, Inc. (Active)
- Transferred
- Transferred
- 61F10AC472
- 56699 - Bc Components (Active)
- Transferred
- Transferred
Datasheet 5910-01-018-2261
- Characteristic
- Specifications
- FIIG
- Specifications
- A010B0
- Body Diameter [ABPM]
- 0.172 Inches Nominal
- Body Length [ADAQ]
- 0.438 Inches Nominal
- Body Style [AAQL]
- W/O Mtg Facilities, Axial Terminals
- Capacitance Value Per Section [CQBQ]
- 4700.000 Picofarads Single Section
- Case Material [CWJK]
- Plastic
- Dielectric Material [CWSS]
- Plastic Polyethylene Terephthalate
- Dissipation Factor At Reference Temp In Percent [CWPM]
- 0.5000
- Nonderated Continuous Voltage Rating And Type Per Section [CQWM]
- 200.0 Dc Single Section
- Nonderated Operating Temp [CQJJ]
- -55.0 Deg Celsius Minimum And 85.0 Deg Celsius Maximum
- Insulation Resistance At Maximum Operating Temp [CQBF]
- 50000.0 Megohms
- Insulation Resistance At Reference Temp [CWPK]
- 500000.0 Megohms
- Internal Electrical Connection Type [AFHW]
- Extended Foil
- Reliability Indicator [AARG]
- Established
- Reliability Failure Rate Level In Percent [AARH]
- 1.0000
- Schematic Diagram Designator [AEBZ]
- No Common Or Grounded Electrode(S)
- Tolerance Range Per Section [CRTP]
- -5.00/+5.00 Percent Single Section
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-55514/1 Government Specification
- Terminal Diameter [AEBT]
- 0.025 Inches Nominal
- Terminal Length [ABJT]
- 1.625 Inches Minimum
- Terminal Type And Quantity [TTQY]
- 2 Uninsulated Wire Lead
- Terminal Surface Treatment [CWSG]
- Solder
- Test Data Document [TEST]
- 81349-Mil-C-55514 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5910-01-018-2261
DLA Procurement Analysis 5910-01-018-2261
- Last Stock Position:
- 46 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5910-01-018-2261
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 5910-01-018-2261
Freight Information 5910-01-018-2261
5910-01-018-2261 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061400. A Sub NMFC of X. It has a NMFC Description of CONDENSERS/PARTS NOI/CAPACITORS. 5910-01-018-2261 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34450 which rates the freight between FCL and LCL. 5910-01-018-2261 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5910-01-018-2261 is not classified as a special type of cargo when transported by water. 5910-01-018-2261 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5910-01-018-2261
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5910-01-018-2261 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: