Premium Information is available for this item - Upgrade for $1 a day
5910-01-016-0063
Plastic Dielectric Fixed Capacitor
5910010160063 010160063 MIL-PRF-19978/3 CS2184 TJU6080 CQ72E1GF805K3 CP70E1DF805X MILC19978-3
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC. View more Plastic Dielectric Fixed Capacitor
November 2023
21
Marketplace 5910-01-016-0063
Request a Quotation from participating marketplace vendors
Related Documents 5910-01-016-0063 5+ Documents (More...)
MILC19978-3 CAPACITOR,FIXED,PLASTIC DIELECTRIC 38 EA NS Request Quotation Updated Every Day 5910-00-904
Navy (DN)NZDiscontinued-Use 5910-01-016-0063Defense Logistics Agency (DS)IZDiscontinued-Use 5910-01-016-0063
MILC19978-3 RETAINER,CAPACITOR 5 EA NS Request Quotation Subscribe to View Vendor Details...
CP07SG2 CQ072SG2 MILC25-7 CP072SG2 MILC19978-3 An item primarily designed to position and/or
MILC19978-3 RETAINER,CAPACITOR 5 EA NS Request Quotation Subscribe to View Vendor Details...
MILC19978-3 RETAINER,CAPACITOR 38 EA NS Request Quotation Updated Every Day 5910-00-245-6720 RQST NE
CQ072FB1 CP072FB1 MILC25-7 MILC19978-3 An item primarily designed to position and/or restrain
MILC19978-3 RETAINER,CAPACITOR 5 EA NS Request Quotation Subscribe to View Vendor Details... https//
MILC19978-3 RETAINER,CAPACITOR 5 EA NS Request Quotation Subscribe to View Vendor Details...
CQ072FB1 CP072FB1 MILC25-7 MILC19978-3 An item primarily designed to position and/or restrain
Restrictions 5910-01-016-0063
5910-01-016-0063 is a Plastic Dielectric Fixed Capacitor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 5910-01-016-0063
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5910-01-016-0063
- US Navy (N9BN)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HDKE
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Aug 1995
- United Kingdom (ZK01)
- Effective Date:
- 1 Jul 2000
- Philippines (ZM01)
- Effective Date:
- 1 Feb 2015
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
- Turkey (ZW01)
- Effective Date:
- 1 Dec 1995
Approved Sources 5910-01-016-0063
- Part Number
- Manufacturer
- Status
- CQ72E1GF805K3
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-19978/3
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- CP70E1DF805X
- 81350 - Joint Army-Navy Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MILC19978-3
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- CS2184
- 28528 - Itt Industries Inc (Replaced)
- Advisory Reference
- Advisory Reference
- TJU6080
- 14655 - Cornell-Dubilier Electronics (Replaced)
- Advisory Reference
- Advisory Reference
Datasheet 5910-01-016-0063
- Characteristic
- Specifications
- FIIG
- Specifications
- A010B0
- Body Height [ADAU]
- 3.875 Inches Nominal
- Body Length [ADAQ]
- 3.750 Inches Nominal
- Body Style [AAQL]
- W/O Mtg Facilities, Terminal(S) On One Surface
- Body Width [ADAT]
- 1.250 Inches Nominal
- Capacitance Value Per Section [CQBQ]
- 8.000 Microfarads Single Section
- Case Material [CWJK]
- Metal
- Center To Center Distance Between Terminals Parallel To Length [AEBP]
- 0.812 Inches Nominal
- Dielectric Material [CWSS]
- Paper And Plastic Polyethylene Terephthalate
- Dissipation Factor At Reference Temp In Percent [CWPM]
- 1.0000
- Features Provided [CBBL]
- Hermetically Sealed Case
- Nonderated Continuous Voltage Rating And Type Per Section [CQWM]
- 600.0 Dc Single Section
- Nonderated Operating Temp [CQJJ]
- -55.0 Deg Celsius Minimum And 85.0 Deg Celsius Maximum
- Insulation Resistance At Maximum Operating Temp [CQBF]
- 15.0 Megohm-Microfarads
- Insulation Resistance At Reference Temp [CWPK]
- 1500.0 Megohm-Microfarads
- Internal Electrical Connection Type [AFHW]
- Extended Foil
- Reliability Indicator [AARG]
- Not Established
- Schematic Diagram Designator [AEBZ]
- No Common Or Grounded Electrode(S)
- Tolerance Range Per Section [CRTP]
- -10.00/+10.00 Percent Single Section
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-19978/3D Government Specification
- Terminal Diameter [AEBT]
- 0.216 Inches Maximum
- Terminal Height From Body [AEBU]
- 1.375 Inches Nominal
- Terminal Type And Quantity [TTQY]
- 2 Standoff, Threaded Stud
- Test Data Document [TEST]
- 81349-Mil-C-19978 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5910-01-016-0063
DLA Procurement Analysis 5910-01-016-0063
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5910-01-016-0063
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5910-01-016-0063
Freight Information 5910-01-016-0063
5910-01-016-0063 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061400. A Sub NMFC of X. It has a NMFC Description of CONDENSERS/PARTS NOI/CAPACITORS. 5910-01-016-0063 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34450 which rates the freight between FCL and LCL. 5910-01-016-0063 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5910-01-016-0063 is not classified as a special type of cargo when transported by water. 5910-01-016-0063 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5910-01-016-0063
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5910-01-016-0063 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: