Premium Information is available for this item - Upgrade for $1 a day
5910-01-007-6315
Plastic Dielectric Fixed Capacitor
5910010076315 010076315 MIL-PRF-19978/3 CQ72E1FK254K1 MIL-C-19978/3 CP72E1EK254K1 MILC25-7
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC. View more Plastic Dielectric Fixed Capacitor
August 2023
18
Marketplace 5910-01-007-6315
Request a Quotation from participating marketplace vendors
Related Documents 5910-01-007-6315 5+ Documents (More...)
CQ72E1GK504K3 MIL-C-19978/3 CP72E1FK504K1 MILC25-7 CQ072FB1 CP072FB1 MILC25-7 MILC19978-3 An
CP70E1EJ156K1 CQ72E1FJ156K3 MIL-C-19978/3 MILC25-7 CQ072FB1 CP072FB1 MILC25-7 MILC19978-3 An
CP72E1EK254K1 A capacitor whose capacitance value cannot be adjusted or varied, having paper as the
Plastic Dielectric Fixed Capacitor 010076315 Dielectric Fixed Capacitor5910010076315 010076315
CP72E1FK504K1 MILC25-7 CQ072FB1 CP072FB1 MILC25-7 MILC19978-3 An https//www.nsnlookup.com /fsg-59/
Plastic Dielectric Fixed Capacitor 010076315 CQ72E1FK254K1 MIL-C-19978/3 CP72E1EK254K1 MILC25-7
MIL-C-19978/3 CAPACITOR,FIXED,PLASTIC DIELECTRIC 35 EA NS Request Quotation Subscribe to View Vendor
CP072FE5 MILC25 An item primarily designed to position and/or restrain MIL-C-19978/3 CP072SG1 An item
CQ72E1GF605K3 235-1004P24 CP72E1FF605K1 MILC25-7 CP70E1FF605K MIL-C-19978/3 A capacitor whose
CP70E1FF605K MIL-C-19978/3 A capacitor whose MIL-C-19978/3 CAPACITOR,FIXED,PLASTIC https//www.nsnlookup.com
Restrictions 5910-01-007-6315
5910-01-007-6315 is a Plastic Dielectric Fixed Capacitor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 5910-01-007-6315
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5910-01-007-6315
- US Air Force (FXGX)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- KE
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5910-01-007-6315
- Part Number
- Manufacturer
- Status
- CQ72E1FK254K1
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-19978/3
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-19978/3
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- CP72E1EK254K1
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MILC25-7
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5910-01-007-6315
- Characteristic
- Specifications
- FIIG
- Specifications
- A010B0
- Body Height [ADAU]
- 2.875 Inches Nominal
- Body Length [ADAQ]
- 2.500 Inches Nominal
- Body Style [AAQL]
- W/O Mtg Facilities, Terminal(S) On One Surface
- Body Width [ADAT]
- 1.188 Inches Nominal
- Capacitance Value Per Section [CQBQ]
- 0.250 Microfarads Single Section
- Case Material [CWJK]
- Metal
- Center To Center Distance Between Terminals Parallel To Length [AEBP]
- 1.125 Inches Nominal
- Dissipation Factor At Reference Temp In Percent [CWPM]
- 1.0000
- Features Provided [CBBL]
- Hermetically Sealed Case
- Nonderated Continuous Voltage Rating And Type Per Section [CQWM]
- 2500.0 Dc Single Section
- Nonderated Operating Temp [CQJJ]
- -55.0 Deg Celsius Minimum And 85.0 Deg Celsius Maximum
- Insulation Resistance At Maximum Operating Temp [CQBF]
- 600.0 Megohms
- Insulation Resistance At Reference Temp [CWPK]
- 6000.0 Megohms
- Internal Electrical Connection Type [AFHW]
- Extended Foil
- Reliability Indicator [AARG]
- Not Established
- Schematic Diagram Designator [AEBZ]
- No Common Or Grounded Electrode(S)
- Tolerance Range Per Section [CRTP]
- -10.00/+10.00 Percent Single Section
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-19978/3D Government Specification
- Terminal Diameter [AEBT]
- 0.190 Inches Minimum
- Terminal Height From Body [AEBU]
- 1.750 Inches Maximum
- Terminal Type And Quantity [TTQY]
- 2 Standoff, Threaded Stud
- Terminal Surface Treatment [CWSG]
- Solder
- Test Data Document [TEST]
- 81349-Mil-C-19978 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5910-01-007-6315
Management Data 5910-01-007-6315
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5910-01-007-6315
Freight Information 5910-01-007-6315
5910-01-007-6315 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061400. A Sub NMFC of X. It has a NMFC Description of CONDENSERS/PARTS NOI/CAPACITORS. 5910-01-007-6315 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34450 which rates the freight between FCL and LCL. 5910-01-007-6315 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5910-01-007-6315 is not classified as a special type of cargo when transported by water. 5910-01-007-6315 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5910-01-007-6315
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5910-01-007-6315 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: