5910-00-666-5240

DAC: 5 1 Jan 1963 3040-00-589-6310 Hub Clamp 112-00-00-13RNCC: 5 | RNVC: 9 | DAC: B 1 Jan 1963 5910-00-666-5240

6625-00-588-2338 Electrical Frequency Discriminator 97DRNCC: 3 | RNVC: 2 | DAC: 5 1 Jan 1961 5910-00-666-5240

3120-01-485-7242 3120014857242 014857242 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.

8405-21-104-1984 8405211041984 211041984 is a replaceable item designed to provide a stationary seating surface for a mating, moveable item such as a valve disk or the like. the body may have a flange of various shapes. for diesel and gasoline reciprocating engines, see insert, engine valve seat.

3120-01-485-7240 3120014857240 014857240 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.