5910-00-001-9009

3040-33-206-4229 3040332064229 332064229 is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. excludes bearing, sleeve; bushing, sleeve; and collar, shaft.

5340-33-206-4232 5340332064232 332064232 is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. it may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. it may also include an integral ratchet device. for similar items having a maximum diameter of less than 3 inches (76.2mm), see knob. for items calibrated in units or series of divisions denoting relative positioning of associated devices, see dial (as modified). excludes steering wheel.

2520-14-392-9479 2520143929479 143929479 FOURCHETTE DE DEPLA

3040-33-206-4209 3040332064209 332064209 is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. it is not designed for use in aliging by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items not having the above conditions see pin, straight, headless. for items used to transmit motion see shaft, straight. for items having machined ends which constitute steps see axle(1), sholdered. excludes shaft(1), shouldered; and bolt, fluid passage.

4320-14-391-5651 4320143915651 143915651 PISTON,PUMP