Premium Information is available for this item - Upgrade for $1 a day
5905-01-432-5508
Noninductive Wire Wound Fixed Resistor
5905014325508 014325508 MIL-PRF-39009/2 RER40F3400M ENH5X012FR3400F ENH-5-12.34 OHM 1% 127-61335-23 MIL-R-39009/2
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flowo s an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXENTEWIRE WOUND, INDUCTIVE. View more Noninductive Wire Wound Fixed Resistor
May 2023
15
Marketplace 5905-01-432-5508
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-432-5508 5+ Documents (More...)
/fsg-59/fsc-5905/us
Day 5905-01-432-5508 RQST Updated Every Day 5905-01-432-5508 RQST NE Related Documents 5905-01-432-5508
RQST Updated Every Day 5905-01-432-5508 RQST NE Related Documents 5905-01-432-5508 RQST Updated
/fsg-59/fsc-5905/us
ENH-5-12.34 OHM 1% ENH5X012FR3400F A resistor whose ohmic value cannot be adjusted or varied.
Noninductive Wire Wound Fixed Resistor ENH-5-12.34 OHM 1% 127-61335-23 MIL-R-39009/2 A resistor
/fsg-59/fsc-5905/us
RER55F60R4M RER55F60R4P MIL-R-39009 /2 RER55F28R0R RER55F28R0M MIL-R-39009/2 A resistor whose RE75N60R4
RER55F64R9R MIL-R-39009/2 RER45F5620R MIL-R-39009/2 A resistor whose ohmic value cannot be adjusted
/fsg-59/fsc-5905/us
RER45F5620R MIL-R-39009/2 A resistor whose ohmic value cannot be adjusted or varied.
RER55F60R4M RER55F60R4P MIL-R-39009 /2 RER55F28R0R RER55F28R0M MIL-R-39009/2 A resistor whose RE75N60R4
A resistor whose RE75N60R4 RER55F60R4M RER55F60R4P MIL-R-39009 /2 RER55F28R0R RER55F28R0M MIL-R
-39009 RER55F60R4M RER55F60R4P MIL-R-39009 /2 RER55F28R0R RER55F28R0M MIL-R-39009/2 A resistor whose
Restrictions 5905-01-432-5508
5905-01-432-5508 is a Noninductive Wire Wound Fixed Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5905-01-432-5508
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-432-5508
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- Singapore (YJ01)
- Effective Date:
- 1 Sep 2012
Approved Sources 5905-01-432-5508
- Part Number
- Manufacturer
- Status
- RER40F3400M
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-39009/2
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-R-39009/2
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ENH5X012FR3400F
- 91637 - Vishay Dale Electronics, Llc (Active)
- Transferred
- Transferred
- ENH-5-12.34 OHM 1%
- 91637 - Vishay Dale Electronics, Llc (Active)
- Transferred
- Transferred
- 127-61335-23
- 04614 - Textron Systems Corporation (Active)
- Transferred
- Transferred
Datasheet 5905-01-432-5508
- Characteristic
- Specifications
- FIIG
- Specifications
- A001A0
- Electrical Resistance [AAPP]
- 340.000 Ohms
- Ambient Temp In Deg Celsius At Full Rated Power [AAQF]
- 25.0
- Ambient Temp In Deg Celsius At Zero Percent Rated Power [AAQG]
- 275.0
- Body Height [ADAU]
- 0.289 Inches Minimum And 0.351 Inches Maximum
- Body Length [ADAQ]
- 0.538 Inches Minimum And 0.662 Inches Maximum
- Body Width [ADAT]
- 0.272 Inches Minimum And 0.396 Inches Maximum
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Length [AEBY]
- 0.434 Inches Minimum And 0.454 Inches Maximum
- Mounting Hole Size [BYML]
- 0.088 Inches Minimum And 0.098 Inches Maximum
- Inclosure Method [AAQZ]
- Encased
- Power Dissipation Rating In Watts [AEFB]
- 3.000 Free Air
- Reliability Failure Rate Level In Percent [AARH]
- 1.000
- Reliability Indicator [AARG]
- Established
- Resistance Tolerance In Percent [AAPQ]
- -1.000/+1.000
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-39009/2 Government Specification
- Style Designator [STYL]
- Axial Terminal (S)
- Temp Coefficient Of Resistance In Ppm Per Deg Celsius [AAPE]
- -30.0/+30.0
- Temp Range Of Temp Coefficient In Deg Celsius [AAQH]
- -55.0/+275.0
- Terminal Type [AARB]
- Tab, Solder Lug
- Terminal Width [AFWW]
- 0.085 Inches Minimum
- Test Data Document [TEST]
- 81349-Mil-R-39009 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5905-01-432-5508
Management Data 5905-01-432-5508
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5905-01-432-5508
Freight Information 5905-01-432-5508
5905-01-432-5508 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-432-5508 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-432-5508 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-432-5508 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-432-5508 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-432-5508
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- No Requirement
- Not Applicable
- --
- Special requirements
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5905-01-432-5508 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: