Premium Information is available for this item - Upgrade for $1 a day
5905-01-428-7219
Noninductive Wire Wound Fixed Resistor
5905014287219 014287219 MIL-PRF-39009/2 RER45F10R5R MIL-PRF-39009/2B
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flowo s an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXENTEWIRE WOUND, INDUCTIVE. View more Noninductive Wire Wound Fixed Resistor
June 2023
11
Marketplace 5905-01-428-7219
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-428-7219 5+ Documents (More...)
/fsg-59/fsc-5905/us
Minutes 5905-01-428-7219 BUY NE FedMall Updated Every Day 5905-01-428-7219 RQST NE Updated Every Day
5905-01-428-7219 RQST Updated Every Day 5905-01-428-7219 RQST NE Related Documents 5905-01-428-7219
/fsg-59/fsc-5905/us
RER45F16R2R MIL-R-39009/2 RER45F16R2M MIL-PRF-39009/2B A resistor whose ohmic value cannot be
Documents 5905-01-551-3424 5+ Documents ( More... https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-428-7219
/fsg-59/fsc-5905/us
5905-01-308-2833 Noninductive Wire Wound Fixed Resistor RER45F16R2R MIL-R-39009/2 RER45F16R2M MIL-PRF-39009/2B
Account Upgrade 5905-00-140-6964Noninductive Wire Wound Fixed Resistor5905001406964 001406964 MIL-PRF-39009/2
/fsg-59/fsc-5905/us
Related Documents 5905-01-261-2136 RER45F30R9M MIL-R-39009/2 A resistor whose ohmic value cannot MIL-PRF-39009/2
RER45F30R9R MIL-R-18546/1 RE65N30R9 RER45F30R9M MIL-R-39009/2 A resistor whose ohmic value cannot MIL-PRF-39009/2
/fsg-59/fsc-5905/us
RER45F16R2R MIL-R-39009/2 RER45F16R2M MIL-PRF-39009/2B A resistor whose ohmic value cannot be
Restrictions 5905-01-428-7219
5905-01-428-7219 is a Noninductive Wire Wound Fixed Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5905-01-428-7219
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-428-7219
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Supplementary Collaborators:
- KE
Approved Sources 5905-01-428-7219
- Part Number
- Manufacturer
- Status
- RER45F10R5R
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-39009/2
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-PRF-39009/2B
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-01-428-7219
- Characteristic
- Specifications
- FIIG
- Specifications
- A001A0
- Electrical Resistance [AAPP]
- 10.500 Ohms
- Ambient Temp In Deg Celsius At Full Rated Power [AAQF]
- 25.0
- Ambient Temp In Deg Celsius At Zero Percent Rated Power [AAQG]
- 275.0
- Body Height [ADAU]
- 0.406 Inches Nominal
- Body Length [ADAQ]
- 0.750 Inches Nominal
- Body Width [ADAT]
- 0.438 Inches Nominal
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Length [AEBY]
- 0.562 Inches Nominal
- End Item Identification [AGAV]
- Preprovisioning Support Navicp Is Poe
- Heat Sink Length [AAQA]
- 6.000 Inches
- Heat Sink Material [AAPZ]
- Aluminum Alloy
- Heat Sink Thickness [AAQE]
- 0.040 Inches
- Heat Sink Height [AAQD]
- 2.000 Inches
- Heat Sink Width [AAQB]
- 4.000 Inches
- Mounting Hole Size [BYML]
- 0.094 Inches Nominal
- Inclosure Method [AAQZ]
- Encased
- Power Dissipation Rating In Watts [AEFB]
- 6.000 Free Air
- Reactance Characteristic [AARE]
- Noninductive
- Reliability Failure Rate Level In Percent [AARH]
- 0.010
- Reliability Indicator [AARG]
- Established
- Resistance Tolerance In Percent [AAPQ]
- -1.000/+1.000
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-39009/2 Government Specification
- Style Designator [STYL]
- Axial Terminal (S)
- Temp Coefficient Of Resistance In Ppm Per Deg Celsius [AAPE]
- -50.0/+50.0
- Temp Range Of Temp Coefficient In Deg Celsius [AAQH]
- -55.0/+275.0
- Terminal Length [ABJT]
- 0.312 Inches Nominal
- Terminal Type [AARB]
- Tab, Solder Lug
- Terminal Width [AFWW]
- 0.140 Inches Minimum
- Test Data Document [TEST]
- 81349-Mil-R-39009 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5905-01-428-7219
DLA Procurement Analysis 5905-01-428-7219
Management Data 5905-01-428-7219
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- PF
- Fighter Aircraft (F14)
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 5905-01-428-7219
Freight Information 5905-01-428-7219
5905-01-428-7219 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-428-7219 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-428-7219 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-428-7219 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-428-7219 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-428-7219
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 7.0" H x 4.4" W x 1.0" L
- --
- --
- --
- Any Suitable Process
- 7.0" H x 4.4" W x 1.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-DTL-17667, Neutral Wrapping Paper
- No Requirement
- Not Applicable
- Vendor's Setup or Folding Box
- Special requirements
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 5905-01-428-7219 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: