Premium Information is available for this item - Upgrade for $1 a day
5905-01-362-6982
Nonprecision Nonwire Wound Variable Resistor
5905013626982 013626982 88040-W102 88040
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Nonwire Wound Variable Resistor
May 2023
9
Marketplace 5905-01-362-6982
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-362-6982 5+ Documents (More...)
Nonprecision Nonwire Wound Variable Resistor 88040-W102RNCC: 3 | RNVC: 2 | DAC: E88040RNCC: D |
RNVC: 9 | MEDALS: Y | DAC: A 9 Aug 1992 5905-01-362-5386 Nonprecision Nonwire Wound Variable Resistor 88040
Nonprecision Nonwire Wound Variable Resistor 88040-W102RNCC: 5 | RNVC: 9 | DAC: 5 13 Aug 1992 5905
1434M44G01RNCC: 5 | RNVC: 9 | DAC: 5 9 Aug 1992 5905-01-362-5386 Nonprecision Nonwire Wound Variable Resistor 88040
What is CAGE Code 88040?
S Challenge Co located at , Batavia IL 60510, United States.Who is CAGE Code 88040?
Desembargador Vitor Lima 260, Sala 607, Florianopolis, Sc, 88040-401, Brazil.Who is CAGE Code 054FK?
Desembargador Vitor Lima 260, Sala 607, Florianopolis, Sc, 88040-401, Brazil.Where is CAGE Code 054FK
Restrictions 5905-01-362-6982
5905-01-362-6982 is a Nonprecision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-01-362-6982
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-362-6982
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
Approved Sources 5905-01-362-6982
- Part Number
- Manufacturer
- Status
- 88040-W102
- Manufacturer
- 037Z3 - Dla Land And Maritime (Active)
- Primary Buy
- Primary Buy
- 88040-W102
- 16236 - Dla Land And Maritime (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 88040-W102
- 32997 - Bourns Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 88040
- 037Z3 - Dla Land And Maritime (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5905-01-362-6982
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 4320.0 Nominal
- Electrical Resistance Per Section [CQCC]
- 200.0 Ohms Single Section
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 85.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 150.0 Single Section
- Body Height [ADAU]
- 0.230 Inches Minimum And 0.270 Inches Maximum
- Body Length [ADAQ]
- 0.230 Inches Minimum And 0.270 Inches Maximum
- Body Width [ADAT]
- 0.250 Inches Minimum And 0.290 Inches Maximum
- Body Style [AAQL]
- Rectangular
- Center To Center Distance Between Center Terminal And Outside Terminal [CQCM]
- 0.090 Inches Minimum And 0.110 Inches Maximum
- Center To Center Distance Between Terminals [AEHT]
- 0.190 Inches Minimum And 0.210 Inches Maximum
- Features Provided [CBBL]
- Humidity Proof
- Maximum Running Torque [AEFL]
- 3.00 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 3.00 Inch-Ounces
- Mounting Method [AXGY]
- Terminal
- Fragility Factor [AFJN]
- Moderately Rugged
- Power Dissipation Rating Per Section In Watts [CRGD]
- 0.25 Free Air Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 4320.0 Nominal
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.050 Inches Minimum And 0.090 Inches Maximum
- Shaft Bearing Type [AEDZ]
- Bearing
- Shaft Length [ABXF]
- 0.020 Inches Minimum And 0.060 Inches Maximum
- Shaft Style [AEDX]
- Round, Slotted
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -100.0 To 100.0 Single Section
- Terminal Length [ABJT]
- 0.070 Inches Minimum And 0.110 Inches Maximum
- Terminal Location [APXH]
- Rear End
- Terminal Type And Quantity [TTQY]
- 3 Pin
DLA Procurement Analysis 5905-01-362-6982
Management Data 5905-01-362-6982
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5905-01-362-6982
Freight Information 5905-01-362-6982
5905-01-362-6982 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-362-6982 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-362-6982 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-362-6982 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-362-6982 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-362-6982
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-01-362-6982 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: