Premium Information is available for this item - Upgrade for $1 a day
5905-01-357-7001
Precision Nonwire Wound Variable Resistor
5905013577001 013577001 2853260-101
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Precision Nonwire Wound Variable Resistor
May 2023
3
Marketplace 5905-01-357-7001
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-357-7001 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5905-01-357-7001 RQST NE Updated Every Day 5905-01-357-7001 RQST
Updated Every Day 5905-01-357-7001 RQST NE Related Documents 5905-01-357-7001 1+ Documents ( More...
Restrictions 5905-01-357-7001
5905-01-357-7001 is a Precision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-01-357-7001
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-357-7001
- US Air Force (FXGX)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXTX
Approved Sources 5905-01-357-7001
- Part Number
- Manufacturer
- Status
- 2853260-101
- Manufacturer
- 92003 - Parker Hannifin Corporation Div (Active)
- Primary Buy
- Primary Buy
Datasheet 5905-01-357-7001
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 320.0 Nominal
- Electrical Resistance Per Section [CQCC]
- 10.0 Percent, Rated Amperes C And Better Flooring
- Actuator Type [AEFD]
- Single Shaft
- Actuator Travel Control Feature [CRSX]
- Continuous Motion
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 70.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 125.0 Single Section
- Body Diameter [ABPM]
- 0.875 Nominal Inches
- Body Length [ADAQ]
- 0.810 Inches Maximum
- Body Style [AAQL]
- Cylindrical Servo Mounted
- Features Provided [CBBL]
- Humidity Proof
- Fragility Factor [AFJN]
- Moderately Rugged
- Function Characteristic Per Section [CSBX]
- 7 Oclock All Primaries
- Function Conformity Per Section [CRGM]
- Single Section Independent Linearity
- Function Conformity Tolerance Per Section [CQFL]
- -0.50/+0.50 Single Section
- Maximum Running Torque [AEFL]
- 0.40 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 0.50 Inch-Ounces
- Mechanical Backlash In Deg Angular Rotation [AEGD]
- 0.25
- Mounting Lip Depth [AEDA]
- 0.0620 Nominal Inches
- Mounting Lip Diameter [AECZ]
- 0.8750 Inches Nominal
- Mounting Method [AXGY]
- Clamp Ring
- Lateral Runout [AEGA]
- 0.002 Inches
- Power Dissipation Rating Per Section In Watts [CRGD]
- 1.0 7Th Secondary Quality
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -2.0/+2.0 Single Section
- Resistance Temp Characteristic Range Per Section In Percent [CQDB]
- -5.0/+5.0 -65 Deg Celsius Single Section And -4.0/+4.0 -15 Deg Celsius Single Section And -2.5/+2.5 50 Deg Celsius Single Section And -5.0/+5.0 75 Deg Celsius Single Section And -5.0/+5.0 105 Deg Celsius Single Section And -5.0/+5.0 125 Deg Celsius Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 360.0 Nominal
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.1248 Inches Nominal
- Shaft Length [ABXF]
- 0.500 Inches Nominal
- Shaft End Play [AEFY]
- 0.005 Inches
- Shaft Style [AEDX]
- Round
- Shaft Radial Play [AEGC]
- 0.001 Inches
- Shaft Runout [AEFZ]
- 0.002 Inches
- Pilot Diameter Runout [AEGB]
- 0.001 Inches
- Pilot Diameter [AAVL]
- 0.7500 Inches Nominal
- Pilot Length [AAVM]
- 0.0620 Inches Nominal
- Undercut Width [ABPC]
- 0.0570 Inches Minimum
- Undercut Diameter [ABPA]
- 0.781 Inches Maximum
- Terminal Location [APXH]
- Radially Positioned Over Less Than Half The Circumference
- Terminal Type And Quantity [TTQY]
- 3 Turret
DLA Procurement Analysis 5905-01-357-7001
Management Data 5905-01-357-7001
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5905-01-357-7001
Freight Information 5905-01-357-7001
5905-01-357-7001 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-357-7001 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-357-7001 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-357-7001 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-357-7001 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-357-7001
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-01-357-7001 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: