Premium Information is available for this item - Upgrade for $1 a day
5905-01-324-2303
Precision Nonwire Wound Variable Resistor
5905013242303 013242303 5030166
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Precision Nonwire Wound Variable Resistor
May 2023
4
Marketplace 5905-01-324-2303
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-324-2303 4+ Documents (More...)
Restrictions 5905-01-324-2303
5905-01-324-2303 is a Precision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item contains gold.
Import and Export 5905-01-324-2303
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-324-2303
- US Army (A918)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A196
- Supplementary Receivers:
- CL
Approved Sources 5905-01-324-2303
- Part Number
- Manufacturer
- Status
- 5030166
- Manufacturer
- 57946 - Us Army Combat Surveillance And (Obsolete)
- Original Design
- Original Design
- 5030166
- 32997 - Bourns Inc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5905-01-324-2303
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 3600.0 Minimum And 3610.0 Maximum
- Electrical Resistance Per Section [CQCC]
- 10.0 Percent, Rated Amperes C And Better Flooring
- End Item Identification [AGAV]
- 6660-01-148-1772 Meteorological Data
- Actuator Travel Control Feature [CRSX]
- Clutch
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 70.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 125.0 Single Section
- Body Diameter [ABPM]
- 0.859 Nominal Mils And 0.891 Nominal Centimeters
- Body Length [ADAQ]
- 0.980 Inches Minimum And 1.020 Inches Maximum
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Fragility Factor [AFJN]
- Moderately Rugged
- Function Characteristic Per Section [CSBX]
- 7 Oclock All Primaries
- Function Conformity Per Section [CRGM]
- Single Section Independent Linearity
- Function Conformity Tolerance Per Section [CQFL]
- -0.25/+0.25 Single Section
- Maximum Running Torque [AEFL]
- 10.00 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 10.00 Inch-Ounces
- Maximum Stop Torque [AEFM]
- 96.00 Inch-Ounces
- Mechanical Backlash In Deg Angular Rotation [AEGD]
- 1.0
- Mounting Bushing Length [ADAP]
- 0.300 Inches Minimum And 0.330 Inches Maximum
- Mounting Method [AXGY]
- Standard Bushing
- Lateral Runout [AEGA]
- 0.005 Inches
- Power Dissipation Rating Per Section In Watts [CRGD]
- 2.0 7Th Secondary Quality
- Precious Material And Location [PMLC]
- Terminal Surfaces Gold
- Precious Material [PRMT]
- Gold
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0/+10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 3600.0 Minimum And 3610.0 Maximum
- Screw Thread Diameter [AJYN]
- 0.375 Inches Nominal
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.2494 Inches Minimum And 0.2497 Inches Maximum
- Shaft Length [ABXF]
- 0.781 Inches Minimum And 0.843 Inches Maximum
- Shaft End Play [AEFY]
- 0.005 Inches
- Shaft Style [AEDX]
- Round, Slotted
- Shaft Radial Play [AEGC]
- 0.003 Inches
- Shaft Runout [AEFZ]
- 0.002 Inches
- Pilot Diameter Runout [AEGB]
- 0.002 Inches
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -100.0/+100.0 Single Section
- Terminal Location [APXH]
- Upper Adjacent Side Two Rows
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
- Test Data Document [TEST]
- 57946-5030166 Drawing (This Is The Basic Governing Drawing, Such As A Contractor Drawing, Original Equipment Manufacturer Drawing, Etc.; Excludes Any Specification, Standard Or Other Document That May Be Referenced In A Basic Governing Drawing)
DLA Procurement Analysis 5905-01-324-2303
Management Data 5905-01-324-2303
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 5905-01-324-2303
Freight Information 5905-01-324-2303
5905-01-324-2303 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-324-2303 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-324-2303 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-324-2303 is not classified as a special type of cargo when transported by water. 5905-01-324-2303 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-324-2303
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-01-324-2303 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: