Premium Information is available for this item - Upgrade for $1 a day
5905-01-320-7769
Nonprecision Wire Wound Variable Resistor
5905013207769 013207769 MIL-PRF-22/3 M22/03-00021UB MIL-R-22/3
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Wire Wound Variable Resistor
May 2023
4
Marketplace 5905-01-320-7769
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-320-7769 5+ Documents (More...)
(Identification) 1/2 NSN 5905-01-320-7769 (Identification) 2/2 - - 1.
BUY NE FedMall Updated Every Day 5905-01-320-7769 RQST NE Updated Every Day 5905-01-320-7769 RQST
M22/03-00112SG RP102SG500KK MIL-R-22/3 A resistor in which a sliding or rolling contact moves over
Nonprecision Wire Wound Variable Resistor M22/03-00021UB MIL-R-22/3 A resistor in which a sliding
M22/03-00092SG RP102SG250KK MIL-R-22/3 A resistor in which a sliding or rolling contact moves over
-5905/us 5905-01-122-9025 Nonprecision Wire Wound Variable Resistor RP102SD3R0KK M22/03-00032SD MIL-R-22/3
M22/03-00092SG RP102SG250KK MIL-R-22/3 A resistor in which a sliding or rolling contact moves over
M22/03-00112SG RP102SG500KK MIL-R-22/3 A resistor in which a sliding or rolling contact moves over
Nonprecision Wire Wound Variable Resistor M22/03-00021UB MIL-R-22/3 A resistor in which a sliding
or rolling contact moves over an exposed M22/03-00092SG RP102SG250KK MIL-R-22/3 A resistor in which
Restrictions 5905-01-320-7769
5905-01-320-7769 is a Nonprecision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-01-320-7769
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-320-7769
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
Approved Sources 5905-01-320-7769
- Part Number
- Manufacturer
- Status
- M22/03-00021UB
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-22/3
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-R-22/3
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-01-320-7769
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 275.0 Minimum And 305.0 Maximum
- Electrical Resistance Per Section [CQCC]
- 1.0 Kilohms Single Section
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 25.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 340.0 Single Section
- Body Diameter [ABPM]
- 1.680 Inches Maximum
- Body Length [ADAQ]
- 1.410 Inches Maximum
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Features Provided [CBBL]
- Humidity Proof
- Cubic Measure [CBME]
- 3.124 Cubic Inches
- End Item Identification [AGAV]
- C141nightgogg
- Maximum Running Torque [AEFL]
- 40.00 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 40.00 Inch-Ounces
- Maximum Stop Torque [AEFM]
- 240.00 Inch-Ounces
- Mounting Bushing Length [ADAP]
- 0.328 Inches Minimum And 0.422 Inches Maximum
- Mounting Method [AXGY]
- Standard Bushing
- Nonturn Device Location [AEFN]
- At 12 Oclock
- Nonturn Device Radius [AEFP]
- 0.485 Inches Minimum And 0.515 Inches Maximum
- Power Dissipation Rating Per Section In Watts [CRGD]
- 25.0 Free Air Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 275.0 Minimum And 305.0 Maximum
- Screw Thread Diameter [AJYN]
- 0.375 Inches Nominal
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.248 Inches Minimum And 0.251 Inches Maximum
- Shaft Bearing Type [AEDZ]
- Sleeve
- Shaft Length [ABXF]
- 0.625 Inches Nominal
- Shaft Style [AEDX]
- Round, Slotted
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-22/3 Government Specification
- Terminal Location [APXH]
- Radially Positioned Over Less Than Half The Circumference
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
- Test Data Document [TEST]
- 81349-Mil-R-22 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5905-01-320-7769
DLA Procurement Analysis 5905-01-320-7769
Management Data 5905-01-320-7769
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5905-01-320-7769
Freight Information 5905-01-320-7769
5905-01-320-7769 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-320-7769 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-320-7769 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-320-7769 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-320-7769 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-320-7769
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-01-320-7769 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: