Premium Information is available for this item - Upgrade for $1 a day
5905-01-313-5125
Precision Nonwire Wound Variable Resistor
5905013135125 013135125 MIL-R-39023/3 1803993-3 176FL1-284 RQ150AC24BC502
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Precision Nonwire Wound Variable Resistor
January 2023
8
Marketplace 5905-01-313-5125
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-313-5125 5+ Documents (More...)
RQST NE Updated Every Day 5905-01-313-5125 RQST Updated Every Day 5905-01-313-5125 RQST NE Related Documents
5905-01-313-5125 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-313-5125
www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-493-2652 Precision Nonwire Wound Variable Resistor 176FL1-284
Restrictions Approved Sources Datasheet Management https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-313-5125
Wound Variable Resistor5905014531699 014531699 https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-313-5125
Resistor Account Upgrade 5905-01-313-5125Precision Nonwire Wound Variable Resistor5905013135125 013135125
) https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-507-36975905015073697 015073697,1803993-3 1803993-3
Restrictions 5905-01-313-5125
5905-01-313-5125 is a Precision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5905-01-313-5125
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-313-5125
- Spain (YB01)
- Effective Date:
- 1 May 1997
Approved Sources 5905-01-313-5125
- Part Number
- Manufacturer
- Status
- RQ150AC24BC502
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-R-39023/3
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 1803993-3
- 03956 - Northrop Grumman Systems Corporation (Active)
- Advisory Reference
- Advisory Reference
- 176FL1-284
- 3L802 - New England Instruments Standards (Obsolete)
- Advisory Reference
- Advisory Reference
Datasheet 5905-01-313-5125
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 360.0 Nominal
- Electrical Resistance Per Section [CQCC]
- 5.0 Kilohms Single Section
- Actuator Type [AEFD]
- Single Shaft
- Actuator Travel Control Feature [CRSX]
- Continuous Motion
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 70.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 125.0 Single Section
- Body Diameter [ABPM]
- 1.625 Inches Maximum
- Body Length [ADAQ]
- 1.060 Inches Maximum
- Body Style [AAQL]
- Cylindrical Servo Mounted
- Features Provided [CBBL]
- Humidity Proof
- Function Characteristic Per Section [CSBX]
- Single Section Linear
- Function Conformity Per Section [CRGM]
- Single Section Independent Linearity
- Function Conformity Tolerance Per Section [CQFL]
- -0.50 To 0.50 Single Section
- Maximum Running Torque [AEFL]
- 0.80 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 1.00 Inch-Ounces
- Mechanical Backlash In Deg Angular Rotation [AEGD]
- 0.25
- Mounting Lip Depth [AEDA]
- 0.0880 Inches Minimum And 0.0980 Inches Maximum
- Mounting Lip Diameter [AECZ]
- 1.4680 Inches Maximum
- Mounting Method [AXGY]
- Clamp Ring
- End Item Identification [AGAV]
- Rudder Angle
- Fragility Factor [AFJN]
- Moderately Rugged
- Lateral Runout [AEGA]
- 0.002 Inches
- Power Dissipation Rating Per Section In Watts [CRGD]
- 1.5 Free Air Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 360.0 Nominal
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.2494 Inches Minimum And 0.250 Inches Maximum
- Shaft Bearing Type [AEDZ]
- Bearing
- Shaft Length [ABXF]
- 0.593 Inches Minimum And 0.656 Inches Maximum
- Shaft End Play [AEFY]
- 0.005 Inches
- Shaft Style [AEDX]
- Round
- Shaft Radial Play [AEGC]
- 0.001 Inches
- Shaft Runout [AEFZ]
- 0.002 Inches
- Pilot Diameter Runout [AEGB]
- 0.001 Inches
- Pilot Diameter [AAVL]
- 1.3120 Inches Minimum And 1.3130 Inches Maximum
- Pilot Length [AAVM]
- 0.0570 Inches Minimum And 0.0670 Inches Maximum
- Undercut Width [ABPC]
- 0.0730 Inches Minimum
- Undercut Diameter [ABPA]
- 1.427 Inches Minimum And 1.442 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-39023/3 Government Specification
- Terminal Location [APXH]
- Lower Adjacent Side Single Row
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
- Test Data Document [TEST]
- 81349-Mil-R-39023 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5905-01-313-5125
Management Data 5905-01-313-5125
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Jun 2006
- Defense Logistics Agency (DS)
- EA
- Subscribe
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Defense Logistics Agency (DS)
- I
- Z
- Discontinued-Use 5905-01-493-2652
- Z
NATO Stock Numbers Related to 5905-01-313-5125
Freight Information 5905-01-313-5125
5905-01-313-5125 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-313-5125 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-313-5125 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-313-5125 is not classified as a special type of cargo when transported by water. 5905-01-313-5125 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-313-5125
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 5905-01-313-5125 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: