Premium Information is available for this item - Upgrade for $1 a day
5905-01-309-2360
Hybrid Variable Resistor
5905013092360 013092360 3541H-1-203
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element. Uniform contact pressure on the resistance element is maintained by positive pressure to permit smooth electrical and mechanical control of the resistor over the entire resistance range. The resistive element is constructed of a combination of two materials usually consisting of a wirewound element with a coating of conductive plastic applied over the resistance wire where the slider makes contact. May be constructed of a single or multiturns of wire supported on an insulating structure on which the wiper contacts the coated wire continuously in the direction of wiper travel. The opposition to the flow of current is an inherent property of the wire used and is manifested in the heat dissipated in the resistor itself. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT; and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes other RESISTOR (1), VARIABLE, (as modified). View more Hybrid Variable Resistor
May 2023
3
Marketplace 5905-01-309-2360
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-309-2360 2+ Documents (More...)
Restrictions 5905-01-309-2360
5905-01-309-2360 is a Hybrid Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item contains gold. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-01-309-2360
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-309-2360
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5905-01-309-2360
- Part Number
- Manufacturer
- Status
- 3541H-1-203
- Manufacturer
- 3Z867 - Bourns, Inc. (Active)
- Primary Buy
- Primary Buy
- 3541H-1-203
- 32997 - Bourns Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-01-309-2360
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 3600.0 Nominal
- Electrical Resistance Per Section [CQCC]
- 20.0 Kilohms Single Section
- End Item Identification [AGAV]
- 4920-01-146-2230 Test Stand,Main Engine Control
- Actuator Travel Control Feature [CRSX]
- Clutch
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 70.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 125.0 Single Section
- Body Diameter [ABPM]
- 0.860 Inches Minimum And 0.890 Inches Maximum
- Body Length [ADAQ]
- 0.735 Inches Minimum And 0.765 Inches Maximum
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Fragility Factor [AFJN]
- Moderately Rugged
- Function Characteristic Per Section [CSBX]
- Single Section Linear
- Function Conformity Per Section [CRGM]
- Single Section Independent Linearity
- Function Conformity Tolerance Per Section [CQFL]
- -0.25/+0.25 Single Section
- Maximum Running Torque [AEFL]
- 0.50 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 0.50 Inch-Ounces
- Mechanical Backlash In Deg Angular Rotation [AEGD]
- 1.0
- Mounting Bushing Length [ADAP]
- 0.297 Inches Minimum And 0.327 Inches Maximum
- Mounting Method [AXGY]
- Standard Bushing
- Lateral Runout [AEGA]
- 0.005 Inches
- Power Dissipation Rating Per Section In Watts [CRGD]
- 2.0 Free Air Single Section
- Precious Material And Location [PMLC]
- Terminal Surfaces Gold
- Precious Material [PRMT]
- Gold
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0/+10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 3600.0 Nominal
- Screw Thread Diameter [AJYN]
- 0.375 Inches Nominal
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.250 Inches Nominal
- Shaft Length [ABXF]
- 0.781 Inches Minimum And 0.843 Inches Maximum
- Shaft End Play [AEFY]
- 0.010 Inches
- Shaft Style [AEDX]
- Round, Slotted
- Shaft Radial Play [AEGC]
- 0.003 Inches
- Shaft Runout [AEFZ]
- 0.003 Inches
- Pilot Diameter Runout [AEGB]
- 0.003 Inches
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -100.0/+100.0 Single Section
- Terminal Location [APXH]
- Longitudinally Positioned On The Circumference
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
Weapon Systems (WSDC) 5905-01-309-2360
DLA Procurement Analysis 5905-01-309-2360
Management Data 5905-01-309-2360
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5905-01-309-2360
Freight Information 5905-01-309-2360
5905-01-309-2360 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-309-2360 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-309-2360 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-309-2360 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-309-2360 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-309-2360
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- --
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5905-01-309-2360 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: