Premium Information is available for this item - Upgrade for $1 a day
5905-01-302-7842
Noninductive Wire Wound Fixed Resistor
5905013027842 013027842 MIL-PRF-18546/2 1436M60P01 RE80N2050 NH250-204OHM1PCT NH-250 204 OHMS 1% MIL-R-18546/2
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flowo s an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXENTEWIRE WOUND, INDUCTIVE. View more Noninductive Wire Wound Fixed Resistor
May 2023
15
Marketplace 5905-01-302-7842
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-302-7842 5+ Documents (More...)
6R00F RE77G6R04 RE77G6R00 MIL-R-18546 /2 A resistor whose ohmic RH-250N20OHM3% RE80N20R0 MIL-R-18546
6R00F RE77G6R04 RE77G6R00 MIL-R-18546 /2 A resistor whose ohmic RH-250N20OHM3% RE80N20R0 MIL-R-18546
/fsg-59/fsc-5905/us
A resistor whose ohmic RH-250N20OHM3% RE80N20R0 MIL-R-18546/2 6R00F RE77G6R04 RE77G6R00 MIL-R-18546
A resistor whose ohmic RH-250N20OHM3% RE80N20R0 MIL-R-18546/2 6R00F RE77G6R04 RE77G6R00 MIL-R-18546
A resistor whose ohmic RH-250N20OHM3% RE80N20R0 MIL-R-18546/2 6R00F RE77G6R04 RE77G6R00 MIL-R-18546
/2 A resistor whose ohmic RH-250N20OHM3% RE80N20R0 MIL-R-18546/2 https//www.nsnlookup.com /fsg-59/fsc
A resistor whose ohmic RH-250N20OHM3% RE80N20R0 MIL-R-18546/2 6R00F RE77G6R04 RE77G6R00 MIL-R-18546
/2 A resistor whose ohmic RH-250N20OHM3% RE80N20R0 MIL-R-18546/2 https//www.nsnlookup.com /fsg-59/fsc
A resistor whose ohmic RH-250N20OHM3% RE80N20R0 MIL-R-18546/2 6R00F RE77G6R04 RE77G6R00 MIL-R-18546
6R00F RE77G6R04 RE77G6R00 MIL-R-18546 /2 A resistor whose ohmic RH-250N20OHM3% RE80N20R0 MIL-R-18546
Restrictions 5905-01-302-7842
5905-01-302-7842 is a Noninductive Wire Wound Fixed Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-01-302-7842
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-302-7842
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
Approved Sources 5905-01-302-7842
- Part Number
- Manufacturer
- Status
- RE80N2050
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-18546/2
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-R-18546/2
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 1436M60P01
- 66464 - General Electric Co (Active)
- Advisory Reference
- Advisory Reference
- NH250-204OHM1PCT
- 91637 - Vishay Dale Electronics, Llc (Active)
- Transferred
- Transferred
- NH-250 204 OHMS 1%
- 91637 - Vishay Dale Electronics, Llc (Active)
- Transferred
- Transferred
Datasheet 5905-01-302-7842
- Characteristic
- Specifications
- FIIG
- Specifications
- A001A0
- Electrical Resistance [AAPP]
- 205.000 Ohms
- End Item Identification [AGAV]
- 4920-01-146-4914 Test Stand,Elec
- Ambient Temp In Deg Celsius At Full Rated Power [AAQF]
- 25.0
- Ambient Temp In Deg Celsius At Zero Percent Rated Power [AAQG]
- 275.0
- Body Height [ADAU]
- 2.157 Inches Minimum And 2.219 Inches Maximum
- Body Length [ADAQ]
- 4.406 Inches Minimum And 4.594 Inches Maximum
- Body Width [ADAT]
- 2.094 Inches Minimum And 2.156 Inches Maximum
- Cubic Measure [CBME]
- 22.153 Cubic Inches
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Length [AEBY]
- 2.990 Inches Minimum And 3.010 Inches Maximum
- Mounting Hole Size [BYML]
- 0.178 Inches Minimum And 0.198 Inches Maximum
- Inclosure Method [AAQZ]
- Encased
- Power Dissipation Rating In Watts [AEFB]
- 75.000 Free Air
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance In Percent [AAPQ]
- -1.000/+1.000
- Unpackaged Unit Weight [PKWT]
- 880.0 Grams
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-18546/2 Government Specification
- Style Designator [STYL]
- Axial Terminal (S)
- Temp Coefficient Of Resistance In Ppm Per Deg Celsius [AAPE]
- -50.0/+50.0
- Temp Range Of Temp Coefficient In Deg Celsius [AAQH]
- -55.0/+275.0
- Terminal Length [ABJT]
- 1.188 Inches Minimum And 1.312 Inches Maximum
- Terminal Type [AARB]
- Threaded Stud
- Test Data Document [TEST]
- 81349-Mil-R-18546 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5905-01-302-7842
DLA Procurement Analysis 5905-01-302-7842
Management Data 5905-01-302-7842
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5905-01-302-7842
Freight Information 5905-01-302-7842
5905-01-302-7842 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-302-7842 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-302-7842 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-302-7842 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-302-7842 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-302-7842
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-01-302-7842 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: