Premium Information is available for this item - Upgrade for $1 a day
5905-01-266-9915
Nonprecision Nonwire Wound Variable Resistor
5905012669915 012669915 MIL-R-39035/2 RJR24CP103R RJ22CP103 RJR24CP103M MILR39035-1 RJ24CR103 RJR24CP103P
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Nonwire Wound Variable Resistor
January 2023
31
Marketplace 5905-01-266-9915
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-266-9915 5+ Documents (More...)
RJR24CP103P RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISION 1 EA NS Request Quotation RJR24CP103M RESISTOR
RJR24CP103P RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISION 1 EA NS Request Quotation RJR24CP103M RESISTOR
5905012669915 012669915,MIL-R-39035/2 5905-01-266-9915 5905012669915 012669915 is a resistor in
5905012669915 012669915,MIL-R-39035/2 5905-01-266-9915 5905012669915 012669915 is a resistor in
(Active) Incomplete Secondary Reference RNCC 5 RNVC 1 DAC 3 MIL-R-39035/2 81349 - Military https//
,MIL-R-39035/2 (Active) Incomplete Secondary Reference RNCC 5 RNVC 1 DAC 3 MIL-R-39035/2 81349 - Military
https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-005-6368 5905010056368 010056368,MIL-R-39035/2
https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-014-4760 5905010144760 010144760,MIL-R-39035/2
Restrictions 5905-01-266-9915
5905-01-266-9915 is a Nonprecision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5905-01-266-9915
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-266-9915
- Poland (WP01)
- Effective Date:
- 1 Sep 2004
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5905-01-266-9915
- Part Number
- Manufacturer
- Status
- RJR24CP103R
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-R-39035/2
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- RJ22CP103
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- RJR24CP103M
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MILR39035-1
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- RJ24CR103
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- RJR24CP103P
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-01-266-9915
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 5400.0 Minimum And 10800.0 Maximum
- Electrical Resistance Per Section [CQCC]
- 10.0 Kilohms Single Section
- Actuator Travel Control Feature [CRSX]
- Clutch
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 85.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 150.0 Single Section
- Body Height [ADAU]
- 0.375 Inches Nominal
- Body Length [ADAQ]
- 0.420 Inches Maximum
- Body Width [ADAT]
- 0.170 Inches Nominal
- Body Style [AAQL]
- Rectangular
- Center To Center Distance Between Center Terminal And Outside Terminal [CQCM]
- 0.100 Inches Nominal
- Center To Center Distance Between Terminals [AEHT]
- 0.200 Inches Nominal
- Center To Center Distance Between Terminal Rows [AYQR]
- 0.100 Inches Nominal
- Cubic Measure [CBME]
- 0.024 Cubic Inches
- Maximum Running Torque [AEFL]
- 5.00 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 5.00 Inch-Ounces
- Mounting Method [AXGY]
- Terminal
- Power Dissipation Rating Per Section In Watts [CRGD]
- 0.5 Free Air Single Section
- Reliability Failure Rate Level In Percent [AARH]
- 0.010
- Reliability Indicator [AARG]
- Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 5400.0 Minimum And 10800.0 Maximum
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.075 Inches Nominal
- Shaft Bearing Type [AEDZ]
- Sleeve
- Shaft Length [ABXF]
- 0.080 Inches Maximum
- Shaft Style [AEDX]
- Round, Slotted
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-39035/2 Government Specification
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -250.0 To 250.0 Single Section
- Terminal Length [ABJT]
- 0.300 Inches Minimum
- Terminal Location [APXH]
- Left Adjacent Side Two Rows
- Terminal Type And Quantity [TTQY]
- 3 Pin
- Test Data Document [TEST]
- 81349-Mil-R-39035 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5905-01-266-9915
Management Data 5905-01-266-9915
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Feb 2005
- Defense Logistics Agency (DS)
- EA
- Subscribe
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Defense Logistics Agency (DS)
- I
- Z
- Discontinued-Use 5905-01-200-3933
- Z
NATO Stock Numbers Related to 5905-01-266-9915
Freight Information 5905-01-266-9915
5905-01-266-9915 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-266-9915 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-266-9915 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-266-9915 is not classified as a special type of cargo when transported by water. 5905-01-266-9915 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-266-9915
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5905-01-266-9915 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: