Premium Information is available for this item - Upgrade for $1 a day
5905-01-265-5213
Nonprecision Wire Wound Variable Resistor
5905012655213 012655213 MIL-PRF-19/2 RA20NBSA103A MILR19-2
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Wire Wound Variable Resistor
May 2023
4
Marketplace 5905-01-265-5213
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-265-5213 5+ Documents (More...)
15 Minutes 5905-01-265-5213 BUY NE FedMall Updated Every Day 5905-01-265-5213 RQST NE Updated Every
Day 5905-01-265-5213 RQST Updated Every Day 5905-01-265-5213 RQST NE Related Documents 5905-01-265-5213
MILR19-2 A resistor in which a sliding or rolling contact moves 2P1119 RA20TASB501A MILR19 -2 RA20SBSD102A
265-5213Nonprecision Wire Wound Variable Resistor5905012655213 012655213 MIL-PRF-19/2 RA20NBSA103A MILR19
5905-00-283-7685 RQST Updated Every Day 5905-00-283-7685 RQST NE Related Documents RA20SBSD102A MILR19-2
MIL-PRF-19/2 RA20NBSA103A MILR19-2 RA20SBSD102A A resistor in which a sliding or rolling contact moves
A resistor in which a sliding or rolling contact moves 2P1119 RA20TASB501A MILR19 -2 RA20SBSD102A
Nonprecision Wire Wound Variable Resistor RA20SBSD102A MILR19-2 A resistor in which a sliding or https
2P1119 RA20TASB501A MILR19-2 69-738-5 A resistor in which a sliding or rolling contact moves over
resistor in which a sliding or rolling contact moves over an exposed area RA20NASG350A 4171780-199 MILR19-2
Restrictions 5905-01-265-5213
5905-01-265-5213 is a Nonprecision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-01-265-5213
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-265-5213
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HD
Approved Sources 5905-01-265-5213
- Part Number
- Manufacturer
- Status
- RA20NBSA103A
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-19/2
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILR19-2
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-01-265-5213
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 220.0 Minimum And 285.0 Maximum
- Electrical Resistance Per Section [CQCC]
- 10.0 Kilohms Single Section
- Actuator Type [AEFD]
- Single Shaft
- Actuator Travel Control Feature [CRSX]
- Stops
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 40.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 105.0 Single Section
- Body Diameter [ABPM]
- 1.220 Inches Nominal
- Body Length [ADAQ]
- 0.910 Inches Nominal
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Features Provided [CBBL]
- Switch
- Mounting Bushing Length [ADAP]
- 0.375 Inches Nominal
- Mounting Method [AXGY]
- Standard Bushing
- Nonturn Device Location [AEFN]
- At 9 Oclock
- Nonturn Device Radius [AEFP]
- 0.531 Inches Nominal
- Power Dissipation Rating Per Section In Watts [CRGD]
- 2.0 Free Air Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 290.0 Minimum And 305.0 Maximum
- Screw Thread Diameter [AJYN]
- 0.375 Inches Nominal
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.250 Inches Nominal
- Shaft Length [ABXF]
- 0.500 Inches Nominal
- Shaft Style [AEDX]
- Round, Slotted
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-19/2 Government Specification
- Switch Current Type And Rating In Amps [CSDK]
- 3.000 Ac
- Switch Operating Position [AEGH]
- Start Of Rotation
- Switch Type [AEEA]
- Rotary
- Switch Voltage Rating In Volts [AEED]
- 115.0
- Switch Contact Arrangement [AEGJ]
- Single Pole, Single Throw, Normally Open, Both Positions Maintained
- Terminal Location [APXH]
- Rear-Bottom
- Terminal Type And Quantity [TTQY]
- 5 Tab, Solder Lug
- Test Data Document [TEST]
- 81349-Mil-R-19 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5905-01-265-5213
Management Data 5905-01-265-5213
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5905-01-265-5213
Freight Information 5905-01-265-5213
5905-01-265-5213 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-265-5213 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-265-5213 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-265-5213 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-265-5213 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-265-5213
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-01-265-5213 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: