Premium Information is available for this item - Upgrade for $1 a day
5905-01-259-0100
Inductive Wire Wound Fixed Resistor
5905012590100 012590100 MIL-PRF-39009/1 RER65F2R87P RER65F2R87R MIL-R-39009/1
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Exclut s SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE. View more Inductive Wire Wound Fixed Resistor
November 2023
13
Marketplace 5905-01-259-0100
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-259-0100 5+ Documents (More...)
Inductive Wire Wound Fixed Resistor 5905-01-259-0100 5905012590100 012590100 is a resistor whose
A resistor whose ohmic value cannot be adjusted RH258870HM25W RE70G8870 RER70F8870R MIL-R-39009/1
RH258870HM25W RE70G8870 RER70F8870R MIL-R-39009/1 A resistor whose ohmic value cannot be adjusted
A resistor whose ohmic value cannot be adjusted RH258870HM25W RE70G8870 RER70F8870R MIL-R-39009/1
RH258870HM25W RE70G8870 RER70F8870R MIL-R-39009/1 A resistor whose ohmic value cannot be adjusted
A resistor whose ohmic value cannot be adjusted RH258870HM25W RE70G8870 RER70F8870R MIL-R-39009/1
RH258870HM25W RE70G8870 RER70F8870R MIL-R-39009/1 A resistor whose ohmic value cannot be adjusted
RH258870HM25W RE70G8870 RER70F8870R MIL-R-39009/1 A resistor whose ohmic value cannot be adjusted
RER65FR365R MIL-R-39009/1 A resistor whose ohmic value cannot be adjusted or varied.
Restrictions 5905-01-259-0100
5905-01-259-0100 is a Inductive Wire Wound Fixed Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5905-01-259-0100
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-259-0100
- US Army (A918)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A196
- Supplementary Receivers:
- AZ
- US Marine Corps (MC49)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- MC13
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HDKE
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
- Australia (ZA01)
- Effective Date:
- 1 Apr 2004
Approved Sources 5905-01-259-0100
- Part Number
- Manufacturer
- Status
- RER65F2R87R
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-39009/1
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-R-39009/1
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- RER65F2R87P
- 81349 - Military Specifications (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5905-01-259-0100
- Characteristic
- Specifications
- FIIG
- Specifications
- A001A0
- Ambient Temp In Deg Celsius At Full Rated Power [AAQF]
- 25.0
- Ambient Temp In Deg Celsius At Zero Percent Rated Power [AAQG]
- 275.0
- Body Height [ADAU]
- 0.406 Inches Nominal
- Body Length [ADAQ]
- 0.750 Inches Nominal
- Body Width [ADAT]
- 0.438 Inches Nominal
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Length [AEBY]
- 0.562 Inches Nominal
- Heat Sink Height [AAQD]
- 2.000 Inches
- Heat Sink Width [AAQB]
- 4.000 Inches
- Heat Sink Length [AAQA]
- 6.000 Inches
- Heat Sink Material [AAPZ]
- Aluminum Alloy
- Heat Sink Thickness [AAQE]
- 0.040 Inches
- Electrical Resistance [AAPP]
- 2.870 Ohms
- Mounting Hole Size [BYML]
- 0.094 Inches Nominal
- Inclosure Method [AAQZ]
- Encased
- Power Dissipation Rating In Watts [AEFB]
- 6.000 Free Air
- Reliability Failure Rate Level In Percent [AARH]
- 0.010
- Reliability Indicator [AARG]
- Established
- Resistance Tolerance In Percent [AAPQ]
- -1.000/+1.000
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-39009/1 Government Specification
- Style Designator [STYL]
- Axial Terminal (S)
- Temp Coefficient Of Resistance In Ppm Per Deg Celsius [AAPE]
- -50.0/+50.0
- Temp Range Of Temp Coefficient In Deg Celsius [AAQH]
- -55.0/+275.0
- Terminal Length [ABJT]
- 0.312 Inches Nominal
- Terminal Type [AARB]
- Tab, Solder Lug
- Terminal Width [AFWW]
- 0.140 Inches Minimum
- Test Data Document [TEST]
- 81349-Mil-R-39009 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5905-01-259-0100
DLA Procurement Analysis 5905-01-259-0100
- Last Stock Position:
- 134 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5905-01-259-0100
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5905-01-259-0100
Freight Information 5905-01-259-0100
5905-01-259-0100 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-259-0100 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-259-0100 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-259-0100 is not classified as a special type of cargo when transported by water. 5905-01-259-0100 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-259-0100
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- No Requirement
- Not Applicable
- --
- Special requirements
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5905-01-259-0100 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: